作者:Fabio Roberto Passador , Adhemar Collà Ruvolo‐Filho , Luiz Antonio Pessan
来源:[J].Polymer Engineering & Science(IF 1.243), 2016, Vol.56 (7), pp.765-775Wiley
摘要:Nanocomposites based on high density polyethylene (HDPE)/linear low density polyethylene (LLDPE) blend were prepared by melt compounding in a twin‐screw extruder using organoclay (montmorillonite) as nano‐filler and a 50/50 wt% mixture of maleic anhydride functionalized high...
作者:Fabio Roberto Passador , Adhemar Collà Ruvolo‐Filho , Luiz Antonio Pessan
来源:[J].Journal of Applied Polymer Science(IF 1.395), 2013, Vol.130 (3), pp.1726-1735Wiley
摘要:ABSTRACT(#br)The influence of two different compatibilizers and their combination (maleic anhydride grafted high density polyethylene, HDPE‐ g ‐MA; maleic anhydride grafted linear low density polyethylene, LLDPE‐ g ‐MA; and 50/50 wt % mixture of these compatibilizers) o...
作者:... Huxi Li , Lian‐Fang Feng , Luiz Antonio Pessan
来源:[J].Journal of Applied Polymer Science(IF 1.395), 2003, Vol.88 (7), pp.1799-1807Wiley
摘要:Abstract(#br)It is very challenging to obtain very large amounts of vinyl monomers grafted onto polymer backbones in the melt through a free‐radical mechanism. The objective of this study was to develop strategies that would allow one to maximize the amount of 3‐isoprop...
作者:... Leonardo Bresciani Canto , Elias Hage Junior , Luiz Antonio Pessan
来源:[J].Macromolecular Symposia, 2001, Vol.176 (1), pp.167-180Wiley
摘要:Abstract(#br)Poly(butylene terephthalate) (PBT) has been toughened by the addition of different impact modifiers such as acrylonitrile‐butadiene‐styrene (ABS), styrene‐butadiene‐styrene triblock copolymer (SBS), high impact polystyrene (HIPS) and HIPS/SBS systems with a...
作者:Luiza Gouvêa Santos , Lidiane Cristina Costa , Luiz Antonio Pessan
来源:[J].Journal of Applied Polymer Science(IF 1.395), 2018, Vol.135 (12), pp.n/a-n/aWiley
摘要:ABSTRACT(#br)Poly(lactic acid)/poly(butylene terephthalate) (PLA/PBT) blends with 3, 5, and 10 wt % of PBT were produced in a twin‐screw extruder, with the addition of ethylene–glycidyl methacrylate copolymer as compatibilizer. An uncompatibilized PLA/PBT blend with 5 wt % o...
作者:Rogério Prataviera , Luiz Antonio Pessan , Antonio José Felix Carvalho
来源:[J].Polymer International(IF 2.125), 2018, Vol.67 (8), pp.1011-1015Wiley
摘要:Abstract(#br)Thermomechanical analysis (TMA) is an effective technique for the characterization of small samples such as thin films of micrometric thickness, allowing the determination of thermal events such as glass transition, softening temperature and thermal expansion. H...


资源合作:cnki.scholar@cnki.net, +86-10-82896619   意见反馈:scholar@cnki.net