台湾工程与科技创新学会
期刊
会议
图书
作者:C. Sujatha , D. Selvathi , S. Karthigai Lakshmi
来源:[J].International Journal of Engineering and Technology Innovation, 2018, Vol.8 (3), pp.200-216台湾工程与科技创新学会
摘要:Automatic detection of road networks from the satellite and aerial images is the most demanded research area, and it is used for various remote sensing applications. The Simplified Gabor Wavelet based approaches are used to extract the road network automatically. In this paper, a...
作者:Yasir Amer Al-Jawhar , Khairun N. Ramli , Mustafa S. Ahmed ...
来源:[J].International Journal of Engineering and Technology Innovation, 2018, Vol.8 (3), pp.217-227台湾工程与科技创新学会
摘要:A high peak-to-average-power ratio (PAPR) is the primary drawback faced by the orthogonal frequency division multiplexing (OFDM) systems in the practical applications. Meanwhile, Partial Transmit Sequence (PTS) is regarded as one of the efficient PAPR reduction techniques in OFDM...
作者:Ahm Shamsuzzoha , Mahmood Al-Kindi , Nasr Al-Hinai
来源:[J].International Journal of Engineering and Technology Innovation, 2018, Vol.8 (3), pp.173-190台湾工程与科技创新学会
摘要:Abstract Open innovation is a growing concern in today’s manufacturing industries, especially within small and medium size enterprises (SMEs). Due to the resource scarcity, SMEs need to be collaborated with the objective to share knowledge and expertise to develop innovative...
作者:Fu-Chen Chen , Yih-Fong Tzeng , Wei-Ren Chen
来源:[J].International Journal of Engineering and Technology Innovation, 2018, Vol.8 (3), pp.228-239台湾工程与科技创新学会
摘要:The objective of this study is to propose and investigate an innovative elliptical exerciser with quick-return effect that mimics the timing of the foot trajectory while jogging. At first, the innovative mechanism of the elliptical exerciser with quick-return effect is proposed. ...
作者:Chan-Young Park , Mi-So Lee , Yu-Seop Kim ...
来源:[J].International Journal of Engineering and Technology Innovation, 2018, Vol.8 (3), pp.191-199台湾工程与科技创新学会
摘要:In this paper, the heating and cooling rates of polymerase chain reaction thermal cyclers was analysed over time, to predict their aging. Two kinds of methods were applied to calculate the rise times of the heating and cooling protocol sections, which were inversely related to th...
作者:Ubaidillah Umar , M. Udin Harun Al Rasyid , Sritrusta Sukaridhoto
来源:[J].International Journal of Engineering and Technology Innovation, 2018, Vol.8 (3), pp.157-172台湾工程与科技创新学会
摘要:A wireless sensor network (WSN) works continuously to gather information from sensors that generate large volumes of data to be handled and processed by applications. Current efforts in sensor networks focus more on networking and development services for a variety of applic...
作者:Bidyadhar Rout , Bibhuti Bhusan Pati
来源:[J].Proceedings of Engineering and Technology Innovation, 2018, Vol.8, pp.46-59台湾工程与科技创新学会
摘要:This paper presents a novel idea of designing the Fractional-Order PID (FOPID) type static synchronous series compensator (SSSC). A power system stabilizer(PSS) is installed to enhance the system transient stability by damping the oscillations. Also, the superiority of the propos...
作者:Babatunde Emmanuel Olatunbosun , Francis Olusesi Borokinni
来源:[J].Proceedings of Engineering and Technology Innovation, 2018, Vol.8, pp.32-39台湾工程与科技创新学会
摘要:Hydrocarbons, in the environmentally friendly group have drawn much attention of scientists and researchers for application as refrigerants. In this work, the performance of two eco-friendly hydrocarbon refrigerants (R510A and R600a) in a retrofitted vapour compression refrigerat...
作者:Hsiao-Han Liu , Bo-Shun Tu , Yew-Loom Chen ...
来源:[J].Proceedings of Engineering and Technology Innovation, 2018, Vol.8, pp.23-31台湾工程与科技创新学会
摘要:Sugar kefir grains (Tibicos) are a symbiotic culture of bacteria and yeasts which were assembled by various strains of microbes attached polysaccharide bracket composed of white transparent particles. Initially, we used chemical colorimetric method to measure that of carbohy...
作者:Wen-Chin Chen , Manh-Hung Nguyen , Pei-Hao Tai
来源:[J].Proceedings of Engineering and Technology Innovation, 2018, Vol.8, pp.09-14台湾工程与科技创新学会
摘要:In recent years, the great trends of industry 4.0, internet of things (IoT), big data analytics, and cloud computing, the design and development of plastic injection molding (PIM) products has been more requested to achieve the requirements of light, thin, short, small, multi-fun...

我们正在为您处理中,这可能需要一些时间,请稍等。

资源合作:cnki.scholar@cnki.net, +86-10-82896619   意见反馈:scholar@cnki.net

×