全部文献期刊学位论文会议报纸专利标准年鉴图书|学者科研项目
中外文文献  中文文献  外文文献
作者:Douglas M. Matson , Xiao Xiao , Justin E. Rodriguez ...
来源:[J].JOM(IF 0.986), 2017, Vol.69 (8), pp.1311-1318Springer
摘要:A major reason to conduct solidification experiments in space is that the unique conditions accessible in reduced-gravity allow investigation of fundamental questions while limiting the influence of sedimentation or buoyancy-induced convection. When processing metallic alloys usi...
作者:Alaa Almansoori , Candice Majewski , Cornelia Rodenburg
来源:[J].JOM(IF 0.986), 2017, Vol.69 (11), pp.2278-2285Springer
摘要:Plasma-etched nanoclay-reinforced Polyamide 12 (PA12) powder is prepared with its intended use in selective laser sintering (LS) applications. To replicate the LS process we present a downward heat sintering (DHS) process, carried out in a hot press, to fabricate tensile tes...
作者:Sudhanshu S. Singh , Tyler J. Stannard , Xianghui Xiao ...
来源:[J].JOM(IF 0.986), 2017, Vol.69 (8), pp.1404-1414Springer
摘要:Structural materials are subjected to combinations of stress and corrosive environments that work synergistically to cause premature failure. Therefore, studies on the combined effect of stress and corrosive environments on material behavior are required. Existing studies have be...
作者:Adam Dachowicz , Siva Chaitanya Chaduvula , Mikhail Atallah ...
来源:[J].JOM(IF 0.986), 2017, Vol.69 (11), pp.2390-2396Springer
摘要:Counterfeiting in metal part manufacturing has become a major global concern. Although significant effort has been made in detecting the implementation of such counterfeits, modern approaches suffer from high expense during production, invasiveness during manufacture, and unrelia...
作者:Yugo Ashida , Yuzo Daigo , Katsuo Sugahara
来源:[J].JOM(IF 0.986), 2017, Vol.69 (8), pp.1381-1388Springer
摘要:Commercial metals and alloys like carbon steels, stainless steels, and nickel-based super alloys frequently encounter the problem of environmentally assisted cracking (EAC) and resulting failure in engineering components. This article aims to provide a perspective on three critic...
作者:Milovan Zecevic , Marko Knezevic
来源:[J].JOM(IF 0.986), 2017, Vol.69 (5), pp.922-929Springer
摘要:This article is concerned with multilevel simulations in sheet metal forming using a physically based polycrystalline homogenization model that takes into account microstructure and the directionality of deformation mechanisms acting at single-crystal level. The polycrystalline-l...
作者:Yang Song , Jianping Peng , Yuezhong Di ...
来源:[J].JOM(IF 0.986), 2017, Vol.69 (12), pp.2844-2850Springer
摘要:Trapezoidal protrusions were added onto flat cathodes with the objective of enhancing the flow resistance to the metal in aluminum electrolysis cells. This design was tested for 8 months and proved to be effective in reducing cell voltage. Subsequently, trials revealed that when ...
作者:Verena Maier-Kiener , Karsten Durst
来源:[J].JOM(IF 0.986), 2017, Vol.69 (11), pp.2246-2255Springer
摘要:Nanoindentation became a versatile tool for testing local mechanical properties beyond hardness and modulus. By adapting standard nanoindentation test methods, simple protocols capable of probing thermally activated deformation processes can be accomplished. Abrupt strain-rate ch...
作者:Weiwei Lei , Wei Liang , Hongxia Wang ...
来源:[J].JOM(IF 0.986), 2017, Vol.69 (11), pp.2297-2301Springer
摘要:Equal channel angular pressing (ECAP) was performed on extruded pure Mg, which was clad with a drilled pure Fe coat through an ECAP die to produce a pure Mg sample without obvious cracks at room temperature. After one-pass ECAP, the grain size decreased because of basal slip...
作者:David A. Rubinos , Víctor Valcárcel , Giovanni Spagnoli ...
来源:[J].JOM(IF 0.986), 2017, Vol.69 (9), pp.1607-1612Springer
摘要:The microstructural characteristics of red mud (RM), especially specific surface area (SSA) and mesoporosity, and the effects of various representative fluids, namely methanol (80% v/v), trichloroethylene (TCE) (1100 mg/L), acetic acid (pH 2), and CaCl2 (5% w/v) a...

我们正在为您处理中,这可能需要一些时间,请稍等。

资源合作:cnki.scholar@cnki.net, +86-10-82896619   意见反馈:scholar@cnki.net

×