全部文献期刊学位论文会议报纸专利标准年鉴图书|学者科研项目
中外文文献  中文文献  外文文献
作者:Qi Xiong , Hongtao Tang , Muxue Wang ...
来源:[J].Journal of Materials Processing Tech.(IF 1.953), 2019, Vol.273Elsevier
摘要:Abstract(#br)The application of an attractive electromagnetic force for small tube bulge forming is a meaningful but challenging issue because it is almost impossible to do so with the traditional electromagnetic bulging method, in which the electromagnetic force is always repuls...
作者:Moslem Paidar , Olatunji Oladimeji Ojo , Amirhossein Moghanian ...
来源:[J].Journal of Materials Processing Tech.(IF 1.953), 2019, Vol.273Elsevier
摘要:Abstract(#br)This paper examines the use of pre-fabricated interlocking arms/threading in enhancing the strength of friction stir spot welded hybrid joints of AA2219/PP-C30S polypropylene polymer by varying parameter combination. The process involves the fabrication of a pre...
作者:Guoliang Qin , Zhiyong Ao , Yong Chen ...
来源:[J].Journal of Materials Processing Tech.(IF 1.953), 2019, Vol.273Elsevier
摘要:Abstract(#br)5052 Al alloy plate was successfully lap-joined to galvanized steel plate by pulsed metal inert gas (MIG) arc welding with Al-Si filler wire. Formability properties of the Al/steel brazed-fusion welded joints with different welding parameters were characterized ...
作者:C. Bouland , V. Urlea , K. Beaubier ...
来源:[J].Journal of Materials Processing Tech.(IF 1.953), 2019, Vol.273Elsevier
摘要:Abstract(#br)Abrasive flow machining (AFM) is considered one of the best-suited candidates for the finishing of complex components made by additive manufacturing. However, the AFM process leads to mass loss and consequent alteration of the part geometry and dimensions. A numerica...
作者:Kailun Zheng , Lei Zhu , Jianguo Lin ...
来源:[J].Journal of Materials Processing Tech.(IF 1.953), 2019, Vol.273Elsevier
摘要:Abstract(#br)The performed research has, for the first time, investigated and compared the drawability of AA6082 at a comparable temperature range between two elevated temperature forming processes: termed (i) Low Temperature Hot Form and Quench (LT-HFQ ® ) or pre-cooled HFQ...
作者:Zhao-zhi Wu , Xiao-yu Wu , Bin Xu ...
来源:[J].Journal of Materials Processing Tech.(IF 1.953), 2019, Vol.273Elsevier
摘要:Abstract(#br)To improve the fabrication efficiency of three-dimensional (3D) microelectrode and to eliminate the discharge ridges on microstructures that are machined by laminated microelectrodes, Sn-plated Cu foils were used to prepare a bundled 3D-laminated microelectrode....
作者:Y.Z. Li , Y.N. Zan , Q.Z. Wang ...
来源:[J].Journal of Materials Processing Tech.(IF 1.953), 2019, Vol.273Elsevier
摘要:Abstract(#br)2.9 mm thick 20 wt% B 4 Cp/6061Al-T6 composite sheets were friction stir welded using a threaded cermet tool at welding speeds of 50–400 mm/min and a tool rotating rate of 1000 rpm and then subjected to post-weld artificial aging. Sound joints were achieved unde...
作者:J.P. Oliveira , K. Ponder , E. Brizes ...
来源:[J].Journal of Materials Processing Tech.(IF 1.953), 2019, Vol.273Elsevier
摘要:Abstract(#br)A multi-process joining technique that combined resistance spot welding and friction element welding was used to produce a three-sheet multi-stack of advanced high strength steel and precipitation hardened aluminum. Each weld process was tested independently and as a...
作者:Fengjun Chen , Hui Wang , Shaohui Yin ...
来源:[J].Journal of Materials Processing Tech.(IF 1.953), 2019, Vol.273Elsevier
摘要:Abstract(#br)This study aimed to determine the erosion effects of negative-pressure cavitation on material removal and surface roughness, and to improve the efficiency of water fluid polishing. We presented a cavitation water-suction polishing (CWSP) without abrasives condition t...
作者:S.Q. Wang , J.G. Li , C.L. He ...
来源:[J].Journal of Materials Processing Tech.(IF 1.953), 2019, Vol.273Elsevier
摘要:Abstract(#br)Residual stress in metal cutting is critical due to its direct influence on the performance of components. An analytical model of residual stress in orthogonal cutting is established in this paper. A constitutive stress updating algorithm based on the radial return (...

我们正在为您处理中,这可能需要一些时间,请稍等。

资源合作:cnki.scholar@cnki.net, +86-10-82896619   意见反馈:scholar@cnki.net

×