全部文献期刊学位论文会议报纸专利标准年鉴图书|学者科研项目
中外文文献  中文文献  外文文献
作者:H. Zhang , X. C. Zhong , Y. Z. He ...
来源:[J].Journal of Materials Engineering and Performance(IF 0.915), 2017, Vol.26 (8), pp.3750-3755Springer
摘要:A series of multi-principal-element (MPE) alloys have been prepared by adding Ni, Mn, Al, Cu and Y into the reference CoCrFe-B alloy. The microstructure and mechanical properties of these MPE alloys have been investigated thoroughly. It is found that the addition of the elements ...
作者:Yuhua Zhang , Xinxin Li , Zhenyong Wu ...
来源:[J].Journal of Materials Engineering and Performance(IF 0.915), 2017, Vol.26 (8), pp.3648-3656Springer
摘要:The fatigue life prediction of metallic materials is always a tough problem that needs to be solved in the mechanical engineering field because it is very important for the secure service of mechanical components. In this paper, a combined nonlinear ultrasonic parameter based on ...
作者:Mahesh Paidpilli , Gaurav Kumar Gupta , Anish Upadhyaya
来源:[J].Journal of Materials Engineering and Performance(IF 0.915), 2017, Vol.26 (9), pp.4470-4480Springer
摘要:In the present study, Al6061-based alloy and composites were produced using powder metallurgy route. Two different kinds of base powders (prealloyed and premixed 6061Al alloy) were mixed with TiB2 particles in compositions ranging from 0 to 15 vol.%, respectively....
作者:K. Devendranath Ramkumar , Aman Jayesh Bhalodi , Harsh Jivani Ashokbhai ...
来源:[J].Journal of Materials Engineering and Performance(IF 0.915), 2017, Vol.26 (11), pp.5620-5640Springer
摘要:The formation of Laves phase in the fusion zone of Inconel 718 welds is considered to be detrimental and requires major attention, as this phase deteriorates the mechanical properties and high-temperature corrosion resistance. This present study addresses the use of current ...
作者:H. Jafari , F. Rahimi , Z. Sheikhsofla ...
来源:[J].Journal of Materials Engineering and Performance(IF 0.915), 2017, Vol.26 (11), pp.5590-5598Springer
摘要:This paper explores cast Mg-5Zn alloy, containing small amounts of yttrium (Y: 0.1-1.5 wt.%), through microstructure evaluation and tensile and hardness tests. The results reveal that addition of Y to the alloy refines microstructure, especially when secondary phases, Mg...
作者:G. Li , S. G. Qu , Y. X. Pan ...
来源:[J].Journal of Materials Engineering and Performance(IF 0.915), 2017, Vol.26 (7), pp.3489-3499Springer
摘要:Surface modification layers (oxide layer and oxygen diffusion region) were manufactured on Ti-6Al-4V alloy substrate by combining multi-pass surface rolling with thermal oxidation. Firstly, multi-pass surface rolling at the load of 750 N was taken to improve the microstructu...
作者:Shude Ji , Zhengwei Li , Zhenlu Zhou ...
来源:[J].Journal of Materials Engineering and Performance(IF 0.915), 2017, Vol.26 (10), pp.5085-5096Springer
摘要:This study focused on the effects of thread on hook and cold lap formation, lap shear property and impact toughness of alclad 2024-T4 friction stir lap welding (FSLW) joints. Except the traditional threaded pin tool (TR-tool), three new tools with different thread locations and o...
作者:Huai-xi Wang , Yu-chun Li , Bin Feng ...
来源:[J].Journal of Materials Engineering and Performance(IF 0.915), 2017, Vol.26 (5), pp.2331-2336Springer
摘要:To investigate the mechanical properties of pressed and sintered PTFE/Al/Ni (polytetrafluoroethylene/aluminum/nickel) composite, uniaxial quasi-static and dynamic compression experiments were conducted at strain rates from 10−2 to 3 × 103/s. The prepare...
作者:B. Alwin , A. K. Lakshminarayanan , M. Vasudevan ...
来源:[J].Journal of Materials Engineering and Performance(IF 0.915), 2017, Vol.26 (12), pp.5825-5836Springer
摘要:The stress corrosion cracking behavior of duplex stainless steel (DSS) weld joint largely depends on the ferrite-austenite phase microstructure balance. This phase balance is decided by the welding process used, heat input, welding conditions and the weld metal chemistry. In...
作者:Hassan Liaquat , Xiaoliang Shi , Kang Yang ...
来源:[J].Journal of Materials Engineering and Performance(IF 0.915), 2017, Vol.26 (7), pp.3457-3464Springer
摘要:In this investigation, the effect of TiC particulate reinforcement and sintering parameters on tribological behavior of TiAl metal matrix composite (TMMC) has been studied and compared with commercially conventional gray cast iron to evaluate the use of TMMC as brake disk ma...

我们正在为您处理中,这可能需要一些时间,请稍等。

资源合作:cnki.scholar@cnki.net, +86-10-82896619   意见反馈:scholar@cnki.net

×