全部文献期刊会议图书|学者科研项目
中外文文献  中文文献  外文文献
作者:Moslem Paidar , Olatunji Oladimeji Ojo ...
来源:[J].Journal of Materials Processing Tech.(IF 1.953), 2019, Vol.273
摘要:Abstract(#br)This paper examines the use of pre-fabricated interlocking arms/threading in enhancing the strength of friction stir spot welded hybrid joints of AA2219/PP-C30S polypropylene polymer by varying parameter combination. The process involves the fabrication of a pre...
作者:Moslem Paidar , Olatunji Oladimeji Ojo ...
来源:[J].Surface & Coatings Technology(IF 1.941), 2019, Vol.361, pp.159-169
摘要:Abstract(#br)This paper aims to understand the impact of post-multi-pass friction stir processing (FSP) on the microstructure, mechanical, wear and fracture behaviors of the fabricated 10 cycle-accumulative roll bonded Al-2%B 4 C composites. The increase in the number of too...
作者:Hossein Alizadeh Razazi , Moslem Paidar , Olatunji Oladimeji Ojo
来源:[J].Vacuum(IF 1.53), 2018, Vol.155, pp.619-630
摘要:Abstract(#br)This study examines the effect of different concentrations of Cr and Mn on the microstructure and mechanical properties of Al-10%Mg-0.1%Ti Alloy by using Al-10Cr and Al-10Mn master alloys. The microstructures were studied via the aid of an optical microscope (OM...
作者:... Akbar Davoodi Jamaloei , Moslem Paidar , Xinjin Cao
来源:[J].Surface & Coatings Technology(IF 1.941), 2019, Vol.378
摘要:Abstract(#br)Laser cladding of Inconel 718 superalloy with 75Cr 3 C 2 + 25(80Ni20Cr) powder was performed with a 400 W pulsed Nd:YAG laser using Response Surface Methodology. Laser frequency, pulse width, and scanning speed were considered as the input variables. The geometr...
作者:... Farshad Akhlaghi , O.O. Ojo , Moslem Paidar
来源:[J].Journal of Alloys and Compounds(IF 2.39), 2019, Vol.780, pp.829-845
摘要:Abstract(#br)In-situ Al-Al x Ni y composites were prepared by reactive infiltration method via reaction between a preform of 12 strands of commercially pure Ni wire (99%) having 150 μm diameter and molten commercially pure aluminum (99.6%), with a subsequent heat treatment. ...
作者:... Mojtaba JAFARIAN , Moslem PAIDAR , Morteza JAFARIAN
来源:[J].Transactions of Nonferrous Metals Society of China(IF 0.917), 2016, Vol.26 (7), pp.1843-1851
摘要:Abstract(#br)Al 7075 and Mg AZ31 alloys were joined by diffusion bonding method. Joining process was performed in pressure range of 10-35 MPa at temperatures of 430-450 °C for 60 min under a vacuum of 13.3 MPa. The microstructure evaluation, phase analysis and distribution o...
作者:Moslem Paidar , Alireza Khodabandeh ...
来源:[J].The International Journal of Advanced Manufacturing Technology(IF 1.205), 2015, Vol.80 (1-4), pp.183-197
摘要:Abstract(#br)In this study, the spot friction welding of 2024-T3 aluminum alloy with 1.6 mm in thickness has been investigated. The effects of the tool rotational speed (630, 1000, and 1600 rpm), shoulder penetration depth (0.3 and 0.7 mm), and pin geometry (cylindrical and trian...
作者:Moslem Paidar , Alireza Khodabandeh
来源:[J].The International Journal of Advanced Manufacturing Technology(IF 1.205), 2016, Vol.82 (9-12), pp.1495-1506
摘要:Abstract(#br)In this research, the galvanized steel with thickness of 2 mm was joined to the 5754 aluminum alloy with thickness of 3 mm by the cold metal transfer MIG welding–brazing process. The effect of the filler wires (AlSi3Mn, AlSi5, and AlSi...
作者:Moslem Paidar , Olatunji Oladimeji Ojo ...
来源:[J].Journal of Manufacturing Processes, 2019, Vol.41, pp.177-187
摘要:Abstract(#br)Modified friction stir clinching (MFSC) with protuberance-keyhole leveling approach is employed in joining dissimilar AA2024-T3/AA7075-T6 Al alloys. This technique is a two-step approach where friction stir clinching is established in the first step while the inheren...

我们正在为您处理中,这可能需要一些时间,请稍等。

资源合作:cnki.scholar@cnki.net, +86-10-82896619   意见反馈:scholar@cnki.net

×