全部文献期刊会议图书|学者科研项目
中外文文献  中文文献  外文文献
作者:Manowar Hussain , Mohammad Shahid Raza ...
来源:[J].Arabian Journal for Science and Engineering, 2017, Vol.42 (5), pp.1765-1773Springer
摘要:In the present research, fiber laser beam welding (FLBW) of thin nickel sheets in two different mediums, i.e., air and water, has been investigated. In air medium, the fiber laser welding operations are performed at different laser powers (60, 80 and 100 W) and scanning speeds (4...
作者:MANOWAR HUSSAIN , ALOK KUMAR DAS
来源:[J].Bulletin of Materials Science(IF 0.584), 2016, Vol.39 (2), pp.469-478Springer
摘要:Abstract(#br)In the present study, cupric oxide (CuO) nanoparticles were synthesized by electrochemical discharge process using strong base electrolytes. The experiments were carried out separately using NaOH and KOH electrolytes. The mass output rate and the crystal size we...
作者:Manowar Hussain , Vijay Mandal ...
来源:[J].Optics and Laser Technology(IF 1.365), 2017, Vol.97, pp.46-59Elsevier
摘要:Abstract(#br)The present study describes the fabrication of TiN particulates reinforced SS316 based Metal Matrix Composites (MMCs) in nitrogen and argon atmosphere. The influence of sintering process parameters on microstructure, density, porosity, wear rate and microhardnes...
作者:Manowar Hussain , Saurav Misra ...
来源:[J].Optics and Lasers in Engineering(IF 1.916), 2018, Vol.105, pp.159-172Elsevier
摘要:Abstract(#br)The purpose of this study is to make a boron carbide (B 4 C) and cubic boron nitride (cBN) reinforced Ti6Al4V metal matrix composites (MMC's) by direct metal laser sintering (DMLS) technique using the continuous wave (CW) SPI fiber laser and to check the feasibi...
作者:Manowar Hussain , Vikash Kumar
来源:[J].Journal of Materials Engineering and Performance(IF 0.915), 2017, Vol.26 (1), pp.76-83Springer
摘要:Abstract(#br)The growing need for high wear-resistant surface with enhanced physical properties has led to extensive researches in the field of surface engineering. Laser cladding emerged to be a promising method to achieve these objectives in a cost-effective way. The present pa...
作者:Manowar Hussain , Vikas Kumar ...
来源:[J].The International Journal of Advanced Manufacturing Technology(IF 1.205), 2018, Vol.97 (5-8), pp.2635-2646Springer
摘要:Abstract(#br)In the present research, direct metal laser sintering (DMLS) method was chosen to fabricate titanium nitride (TiN) reinforced Ti6Al4V alloy based metal matrix composites (MMCs) under an argon atmosphere using continuous wave (CW) fiber laser having a capacity of...
作者:Manowar Hussain , Vikas Kumar ...
来源:[J].Materials Today: Proceedings, 2017, Vol.4 (9), pp.9982-9986Elsevier
摘要:Abstract(#br)In the present work, formation of reinforced TiN -SS316 metal matrix composites using fiber laser sintering through DMLS process were studied. Different laser input parameters, for example, laser power (50-65W), scanning speed 4000 mm/min, spot diameter 0.4 mm, layer...
作者:Manowar Hussain , Alok Kumar Das
来源:[J].Materials Today: Proceedings, 2018, Vol.5 (13), pp.26804-26809Elsevier
摘要:Abstract(#br)The structural and optical studies of silver oxide (Ag 2 O) nanoparticles were generated through electrochemical discharge process. In this experiment synthesized Ag 2 O NPs were annealed at different temperatures. The synthesized Ag 2 O NPs were characterized by the...

我们正在为您处理中,这可能需要一些时间,请稍等。

资源合作:cnki.scholar@cnki.net, +86-10-82896619   意见反馈:scholar@cnki.net

×