全部文献期刊学位论文会议报纸专利标准年鉴图书|学者科研项目
中外文文献  中文文献  外文文献
作者:Lih‐Sheng Turng , Wan‐Ju Li
来源:[J].Journal of Biomedical Materials Research Part B: Applied Biomaterials(IF 2.308), 2014, Vol.102 (7), pp.1434-1444Wiley
摘要:Abstract(#br)Thermoplastic polyurethane (TPU)/hydroxyapatite (HA) scaffolds were fabricated via electrospinning. The effects of TPU properties and HA particle size on scaffold physical properties and osteoblast‐like cell performance were investigated. It was found that the a...
作者:... Guoqun Zhao , Lih‐Sheng Turng , Xiangfang Peng
来源:[J].Polymer Composites(IF 1.482), 2017, Vol.38 (9), pp.1771-1782Wiley
摘要:It is essential to examine the mechanisms of plastic deformation of polymer composites under external loads and large strains, especially if the material is intended to be used in a dynamic environment. This work investigated the variation of structure as well as the propert...
作者:... Huiwen Yu , Tangqing Kuang , Lih‐Sheng Turng
来源:[J].Advances in Polymer Technology(IF 1.096), 2017, Vol.36 (1), pp.86-97Wiley
摘要:ABSTRACT(#br)Different kind of discontinuous baffles, which had the larger geometric ratios and higher height than the previous ones, were inserted in the unwound channel of a single‐screw extruder to generate chaotic mixing in the screw channel. The periodic unit of the flo...
作者:... Haoyang Mi , Lih‐Sheng Turng , Xiangfang Peng
来源:[J].Polymer Engineering & Science(IF 1.243), 2017, Vol.57 (5), pp.570-580Wiley
摘要:In this study, poly(lactic acid) (PLA)/polytetrafluoroethylene (PTFE) composites containing different amounts of PTFE were prepared by melt blending. The mechanical, crystallization, and foaming properties of the prepared composites were investigated. Tensile test results in...
作者:Adam Kramschuster , Lih‐Sheng Turng
来源:[J].Journal of Biomedical Materials Research Part B: Applied Biomaterials(IF 2.308), 2010, Vol.92B (2), pp.366-376Wiley
摘要:Abstract(#br)In this research, injection molding was combined with a novel material combination, supercritical fluid processing, and particulate leaching techniques to produce highly porous and interconnected structures that have the potential to act as scaffolds for tissue ...
作者:... Yuejun Liu , Huiwen Yu , Lih‐Sheng Turng
来源:[J].Polymer Engineering & Science(IF 1.243), 2014, Vol.54 (1), pp.198-207Wiley
摘要:A geometry in which the mixing of a single‐screw extruder was enhanced by a reciprocating baffle is proposed in this article. The effect of the baffle's amplitude on the mixing kinematics of the screw channel was investigated. A model with the baffle lower than the screw cha...
作者:Xiaofei Sun , Lih‐Sheng Turng
来源:[J].Polymer Engineering & Science(IF 1.243), 2014, Vol.54 (4), pp.899-913Wiley
摘要:A novel method of producing injection molded parts with a foamed structure has been developed. It has been named supercritical fluid‐laden pellet injection molding foaming technology (SIFT). Compared with conventional microcellular foaming technologies, it lowers equipment c...
作者:... Max R. Salick , Xiang‐Fang Peng , Lih‐Sheng Turng
来源:[J].Polymer Composites(IF 1.482), 2014, Vol.35 (7), pp.1408-1417Wiley
摘要:In this study, biomedical thermoplastic polyurethane/graphene oxide (TPU/GO) composite scaffolds were successfully prepared using the thermally induced phase separation (TIPS) technique. The microstructure, morphology, and thermal and mechanical properties of the scaffolds w...
作者:... Tao Liu , Ling Zhao , Lih‐Sheng Turng
来源:[J].Polymer Engineering & Science(IF 1.243), 2014, Vol.54 (12), pp.2739-2745Wiley
摘要:The microcellular injection molding (commercially known as MuCell) of in situ polymerization‐modified PET (m‐PET) was performed using supercritical nitrogen as the physical blowing agent. Based on the design of experiment matrices, the influence of operating conditions on th...
作者:... Max R. Salick , Xiang‐Fang Peng , Lih‐Sheng Turng
来源:[J].Polymer Engineering & Science(IF 1.243), 2014, Vol.54 (12), pp.2947-2957Wiley
摘要:Injection foaming is an method for mass producing lightweight, foamed plastic components with excellent dimensional stability while using less material and energy. In this study, a novel injection foaming method employing supercritical CO2 (scCO2) and w...

我们正在为您处理中,这可能需要一些时间,请稍等。

资源合作:cnki.scholar@cnki.net, +86-10-82896619   意见反馈:scholar@cnki.net

×