全部文献期刊学位论文会议报纸专利标准年鉴图书|学者科研项目
中外文文献  中文文献  外文文献
作者:Junsu Park , Jae Won Shim
来源:[J].Journal of the Korean Physical Society(IF 0.506), 2016, Vol.69 (11), pp.1613-1618Springer
摘要:Abstract(#br)We fabricated transparent indium zinc oxide (IZO)/TiO2/IZO devices on flexible polyethylene phthalate (PET) substrates. These devices demonstrate bipolar resistive switching behavior, exhibit a transmittance greater than 80 % for visible light, and have st...
作者:Junsu Park , Seongsik Hyeon ...
来源:[J].Journal of Industrial and Engineering Chemistry(IF 2.145), 2018Elsevier
摘要:Abstract(#br)Increasing energy and power densities is one of the important required improvements in lithium ion batteries. However, there exist limitations in increasing both energy and power densities simultaneously because of the increase in internal resistance. In this wo...
作者:Junsu Park , Gil-Pyo Kim ...
来源:[J].Journal of Nanoparticle Research(IF 2.175), 2013, Vol.15 (9), pp.1-9Springer
摘要:Abstract(#br)A Co 3 O 4 /ordered mesoporous carbon (OMC) nanocomposite, in which Co 3 O 4 nanoparticles (NPs), with an average size of about 10 nm homogeneously embedded in the OMC framework, are prepared for use as an anode material in Li-ion batteries. The composite is pre...
作者:Junsu Park , Young-Gwan Sin ...
来源:[J].Applied Surface Science(IF 2.112), 2016, Vol.384, pp.353-359Elsevier
摘要:Abstract(#br)Selective laser lift-off (SLLO) is an innovative technology used to manufacture and repair micro-light-emitting diode (LED) displays. In SLLO, laser is irradiated to selectively separate micro-LED devices from a transparent sapphire substrate. The light source used i...
作者:Junsu Park , Inkyu Yeo ...
来源:[J].Journal of Materials Processing Tech.(IF 1.953), 2019, Vol.266, pp.283-291Elsevier
摘要:Abstract(#br)Piston friction is the primary cause of power loss in automotive engines and thus reducing the friction on piston surface is crucial for the improvement of engine performance. In this work, the effects of laser shock peening on friction characteristics of JIS-AC8A al...
作者:Junsu Park , Byoung Kyu Kwak ...
来源:[J].Journal of Nanoparticle Research(IF 2.175), 2011, Vol.13 (7), pp.3043-3049Springer
摘要:Abstract(#br)Protective dermal equipment (PDE) should be provided for protecting against the penetration of nanomaterials into the skin in the workplace. It is important that workers utilize appropriate PDE with characteristics to accomplish this. During the liquid-phase process,...
作者:Junsu Park , Byoung Kyu Kwak ...
来源:[J].Journal of Nanoparticle Research(IF 2.175), 2009, Vol.11 (7), pp.1705-1712Springer
摘要:Abstract(#br)An assessment of the extent of exposure to nanomaterials in the workplace will be helpful in improving the occupational safety of workers. It is essential that the exposure data in the workplace are concerned with risk management to evaluate and reduce worker exposur...
作者:Junsu Park , Won Gyun Moon ...
来源:[J].Electrochimica Acta(IF 3.777), 2013, Vol.105, pp.110-114Elsevier
摘要:Abstract(#br)Vertically aligned mesoporous carbon nanotubes (MCTs) filled with Co 3 O 4 nanoparticles (NPs) were fabricated by a dual template method; a hard template-assisted sol–gel process. The Co 3 O 4 /MCT electrode was characterized by scanning electron microscopy, tra...
作者:... Inho Nam , Junsu Park , Jongheop Yi
来源:[J].Journal of Power Sources(IF 4.675), 2013, Vol.237, pp.172-177Elsevier
摘要:Abstract(#br)A simple strategy is described for the synthesis of nickel oxide embedded in a carbonaceous matrix (NiO/C) using a templated agarose gel thin film, in an attempt to produce an electrode with a large reversible capacity and long cycle stability. The as-prepared f...
作者:... Gil-Pyo Kim , Junsu Park , Jongheop Yi
来源:[J].Journal of Power Sources(IF 4.675), 2013, Vol.244, pp.56-62Elsevier
摘要:Abstract(#br)A one step method for the fabrication of Mn 3 O 4 nanoparticles/graphene composite materials is described. An in-situ transformation technique using an aqueous phase at ambient conditions is employed. During the process of forming Mn 3 O 4 nanoparticles, graphen...

我们正在为您处理中,这可能需要一些时间,请稍等。

资源合作:cnki.scholar@cnki.net, +86-10-82896619   意见反馈:scholar@cnki.net

×