全部文献期刊学位论文会议报纸专利标准年鉴图书|学者科研项目
中外文文献  中文文献  外文文献
作者:F. Lambiase , A. Paoletti , A. Di Ilio
来源:[J].The International Journal of Advanced Manufacturing Technology(IF 1.205), 2017, Vol.90 (9-12), pp.2827-2837Springer
摘要:This study investigates the influence of the plunging force in friction spot stir welding of polycarbonate sheets on the mechanical behavior of the welds. Experimental tests were carried out by varying the tool geometry and the applied plunging force. Mechanical tests based on si...
作者:F. Lambiase , S. Genna , C. Leone
来源:[J].Optics and Lasers in Engineering(IF 1.916), 2020, Vol.124Elsevier
摘要:Abstract(#br)Laser surface finishing of 3D printed components made by material extrusion is investigated. A 30W CO 2 laser source, working in continuous wave (CW) mode, was employed to treat the surface of components made of Polylactic acid (PLA) obtained by material extrusi...
作者:F. Lambiase , S. Genna
来源:[J].Optics and Laser Technology(IF 1.365), 2017, Vol.88, pp.205-214Elsevier
摘要:Abstract(#br)Laser-Assisted Metal and Plastic bonding (LAMP) of AISI304 sheets with polycarbonate sheets is investigated in this work. The process was performed by means of a high power diode laser with a maximum power of 200 W. The study introduces an integrated experimental app...
作者:F. Lambiase , S. Genna ...
来源:[J].Optics and Laser Technology(IF 1.365), 2017, Vol.94, pp.45-58Elsevier
摘要:Abstract(#br)Laser-Assisted Direct Joining (LADJ) has been employed for a wide variety of materials including metals, thermoplastics and reinforced thermoplastics. The feasibility of Laser-Assisted Direct Joining (LADJ) of Carbon Fibre Reinforced Polymer (CFRP) with thermosetting...
作者:F. Lambiase , S. Genna
来源:[J].Optics and Laser Technology(IF 1.365), 2018, Vol.107, pp.80-88Elsevier
摘要:Abstract(#br)Laser Assisted Joining (LAJ) of Aluminum AA5053 sheets with Polyvinyl chloride (PVC) is investigated. The process was performed by means of a diode laser with a maximum power of 200 W. The materials did not show good chemical affinity. Thus, laser sculpturing was per...
作者:F. Lambiase , S. Genna , R. Kant
来源:[J].Optics and Laser Technology(IF 1.365), 2018, Vol.98, pp.363-372Elsevier
摘要:Abstract(#br)The quality of the joints produced by means of Laser-Assisted Metal to Polymer direct joining (LAMP) is strongly influenced by the temperature field produced during the laser treatment. The main phenomena including the adhesion of the plastic to the metal sheet and t...
作者:F. Lambiase , S. Genna
来源:[J].International Journal of Adhesion and Adhesives(IF 1.295), 2018, Vol.84, pp.265-274Elsevier
摘要:Abstract(#br)The work is aimed at understanding the influence of process parameters of Laser Assisted Joining of Al-Mg alloy with Polyetheretherketone (PEEK) on the mechanical behavior of the joints. Experimental joining tests were performed by means of a diode laser, with maximu...
作者:S. Genna , F. Lambiase , C. Leone
来源:[J].Composites Part B(IF 2.143), 2018, Vol.145, pp.206-214Elsevier
摘要:Abstract(#br)The present paper investigates the influence of laser cleaning of Carbon Fibre Reinforced Plastic (CFRP) surface when joining CFRP to Polycarbonate (PC) sheet by means of laser assisted Joining.(#br)Experimental tests were conducted to perform polycarbonate-CFRP (wit...
作者:F. Lambiase , A. Paoletti , A. Ilio
来源:[J].The International Journal of Advanced Manufacturing Technology(IF 1.205), 2017, Vol.88 (9-12), pp.3005-3016Springer
摘要:Abstract(#br)This study investigates the influence of the tool dimensions on the mechanical behavior of friction stir spot welds performed on polycarbonate sheets. Different tools were used by varying the pin geometry (cylindrical and tapered) and the diameters of the tool pin an...
作者:F. Lambiase , S. Genna , R. Kant
来源:[J].The International Journal of Advanced Manufacturing Technology(IF 1.205), 2018, Vol.97 (5-8), pp.2655-2666Springer
摘要:Abstract(#br)An integrated experimental-simulation study is carried out to optimize of laser-assisted joining of metals and plastics. An empirical model that predicts the local strength based on the temperature distribution was developed. Experimental mechanical tests were involv...

我们正在为您处理中,这可能需要一些时间,请稍等。

资源合作:cnki.scholar@cnki.net, +86-10-82896619   意见反馈:scholar@cnki.net

×