全部文献期刊会议图书|学者科研项目
中外文文献  中文文献  外文文献
作者:F. Lambiase , A. Paoletti , A. Di Ilio
来源:[J].The International Journal of Advanced Manufacturing Technology(IF 1.205), 2017, Vol.90 (9-12), pp.2827-2837
摘要:This study investigates the influence of the plunging force in friction spot stir welding of polycarbonate sheets on the mechanical behavior of the welds. Experimental tests were carried out by varying the tool geometry and the applied plunging force. Mechanical tests based on si...
作者:F. Lambiase , S. Genna , C. Leone
来源:[J].Optics and Lasers in Engineering(IF 1.916), 2020, Vol.124
摘要:Abstract(#br)Laser surface finishing of 3D printed components made by material extrusion is investigated. A 30W CO 2 laser source, working in continuous wave (CW) mode, was employed to treat the surface of components made of Polylactic acid (PLA) obtained by material extrusi...
作者:F. Lambiase , V. Grossi , A. Paoletti
来源:[J].The International Journal of Advanced Manufacturing Technology(IF 1.205), 2020, Vol.107 (1-2), pp.489-501
摘要:Abstract(#br)The influence of the tilt angle on the quality of Friction Stir welds made on polycarbonate sheets is investigated, experimentally. Welding tests were conducted by varying the tilt angle and the welding speed to determine possible interactions between these proc...
作者:F. Lambiase , V. Grossi ...
来源:[J].The International Journal of Advanced Manufacturing Technology(IF 1.205), 2020, Vol.106 (5), pp.2451-2462
摘要:Friction stir joining (FSJ process was preformed to produce hybrid joints between amorphous thermoplastic (polycarbonate and carbon fiber-reinforced plastic (CFRP with thermosetting matrix in lap configuration. The influence of the pin plunging depth (within the CFRP and the tool...
作者:F. Lambiase , S. Genna
来源:[J].Optics and Laser Technology(IF 1.365), 2018, Vol.107, pp.80-88
摘要:Abstract(#br)Laser Assisted Joining (LAJ) of Aluminum AA5053 sheets with Polyvinyl chloride (PVC) is investigated. The process was performed by means of a diode laser with a maximum power of 200 W. The materials did not show good chemical affinity. Thus, laser sculpturing was per...
作者:F. Lambiase , S. Genna , R. Kant
来源:[J].Optics and Laser Technology(IF 1.365), 2018, Vol.98, pp.363-372
摘要:Abstract(#br)The quality of the joints produced by means of Laser-Assisted Metal to Polymer direct joining (LAMP) is strongly influenced by the temperature field produced during the laser treatment. The main phenomena including the adhesion of the plastic to the metal sheet and t...
作者:F. Lambiase , S. Genna
来源:[J].International Journal of Adhesion and Adhesives(IF 1.295), 2018, Vol.84, pp.265-274
摘要:Abstract(#br)The work is aimed at understanding the influence of process parameters of Laser Assisted Joining of Al-Mg alloy with Polyetheretherketone (PEEK) on the mechanical behavior of the joints. Experimental joining tests were performed by means of a diode laser, with maximu...
作者:F. Lambiase , A. Paoletti ...
来源:[J].Journal of Materials Processing Tech.(IF 1.953), 2019, Vol.266, pp.639-650
摘要:Abstract(#br)The influence of welding and tool rotation speeds on processing loads and temperature distribution developing is Friction Stir Welding of polycarbonate is investigated, experimentally. The development of critical conditions leading to macroscopic defects were co...
作者:F. Lambiase , S. Genna ...
来源:[J].Optics and Laser Technology(IF 1.365), 2017, Vol.94, pp.45-58
摘要:Abstract(#br)Laser-Assisted Direct Joining (LADJ) has been employed for a wide variety of materials including metals, thermoplastics and reinforced thermoplastics. The feasibility of Laser-Assisted Direct Joining (LADJ) of Carbon Fibre Reinforced Polymer (CFRP) with thermosetting...
作者:F. Lambiase , S. Genna
来源:[J].Optics and Laser Technology(IF 1.365), 2017, Vol.88, pp.205-214
摘要:Abstract(#br)Laser-Assisted Metal and Plastic bonding (LAMP) of AISI304 sheets with polycarbonate sheets is investigated in this work. The process was performed by means of a high power diode laser with a maximum power of 200 W. The study introduces an integrated experimental app...

我们正在为您处理中,这可能需要一些时间,请稍等。

资源合作:cnki.scholar@cnki.net, +86-10-82896619   意见反馈:scholar@cnki.net

×