全部文献期刊学位论文会议报纸专利标准年鉴图书|学者科研项目
中外文文献  中文文献  外文文献
作者:E. Irissou , A. McDonald
来源:[J].International Journal of Thermal Sciences(IF 2.47), 2012, Vol.56, pp.12-18Elsevier
摘要:Abstract(#br)In this study, the Nusselt numbers of impinging compressible fluid jets originating from a cold-gas dynamic spraying nozzle were determined. A low-pressure cold-gas dynamic spraying unit was used to generate a jet of hot compressed nitrogen that impinged upon flat su...
作者:E. Irissou , B. Davis ...
来源:[J].Corrosion Science(IF 3.615), 2015, Vol.90, pp.259-265Elsevier
摘要:Abstract(#br)Inert anodes for Al electrolysis were produced by cold spray deposition of mechanical alloyed 65Cu20Ni15Fe powder. No structural change of the 65Cu20Ni15Fe alloy was observed during the cold spray processing apart from a small crystallite size increase. The elec...
作者:... P. Vo , E. Irissou , R.R. Chromik
来源:[J].Surface & Coatings Technology(IF 1.941), 2015, Vol.270, pp.324-333Elsevier
摘要:Abstract(#br)Five Al–Al 2 O 3 coatings were deposited by gas dynamic cold spray, using feedstocks containing 0, 10, and 50 wt.% of Al 2 O 3 particles admixed into commercially pure Al powders. Two feedstocks were made using Al 2 O 3 powders with an angular, blocky Al 2 O 3 m...
作者:E. Irissou , A. Dadouche , R. S. Lima
来源:[J].Journal of Thermal Spray Technology(IF 1.481), 2014, Vol.23 (1-2), pp.252-261Springer
摘要:Abstract(#br)The processing conditions, microstructural and tribological characterizations of plasma-sprayed CoNiCrAlY-BN high temperature abradable coatings are reported in this manuscript. Plasma spray torch parameters were varied to produce a set of abradable coatings exhibiti...
作者:E. Irissou , J.-G. Legoux
来源:[J].Tribology Letters(IF 1.743), 2014, Vol.54 (2), pp.191-206Springer
摘要:Abstract(#br) Reciprocating sliding wear experiments were conducted on cold-sprayed pure aluminum and Al–22.6 wt% Al 2 O 3 coatings using a custom-built in situ tribometer. Using a transparent sapphire counterface for the wear tests, the dynamic behavior of third body materi...
作者:... R. Gauvin , E. Irissou , J.-G. Legoux
来源:[J].Surface & Coatings Technology(IF 1.941), 2013, Vol.215, pp.350-356Elsevier
摘要:Abstract(#br)An in situ tribometer utilizing a transparent hemispherical counterface was used to conduct sliding wear tests on Al-Al 2 O 3 composite coatings deposited by cold spray. Direct observation of the wear interface via the slider allowed for correlation to be identified ...
作者:E. Irissou , J.-G. Legoux
来源:[J].Journal of Thermal Spray Technology(IF 1.481), 2013, Vol.22 (6), pp.954-964Springer
摘要:Abstract(#br)The cold spray of Ti-6Al-4V coatings deposited on Ti-6Al-4V substrates has been investigated. Coatings were produced using nitrogen and helium as propellant gases and subsequently heat treated with various temperature-time conditions. The microstructure was char...
作者:E. Irissou , P. Vo ...
来源:[J].Journal of Thermal Spray Technology(IF 1.481), 2013, Vol.22 (2-3), pp.413-421Springer
摘要:Abstract(#br)Inconel 718 was cold spray formed to a 6-mm thickness on an 8-cm diameter aluminum alloy tube using Sulzer Amdry 1718 powder and the Plasma Giken PCS-1000 cold spray system. The effects of spray particle velocity and post-spray heat treatment were studied. Post-...
作者:E. Irissou , J.-G. Legoux ...
来源:[J].Journal of Thermal Spray Technology(IF 1.481), 2012, Vol.21 (6), pp.1322-1333Springer
摘要:Abstract(#br)The individual and cumulative effects of in situ pulsed laser ablation and continuous laser pre-heating on adhesion and cohesion strength of cold sprayed Ti-6Al-4V coatings are investigated. Laser beams were coupled to a cold spray gun in order to ablate and pre-heat...
作者:... A. N. Ryabinin , E. Irissou , J.-G. Legoux
来源:[J].Journal of Thermal Spray Technology(IF 1.481), 2013, Vol.22 (2-3), pp.391-397Springer
摘要:Abstract(#br)In this study, the temperature distribution of the surfaces of several substrates under an impinging gas jet from a cold spray nozzle was determined. A low-pressure cold-gas dynamic spraying unit was used to generate a jet of hot compressed nitrogen that impinge...

我们正在为您处理中,这可能需要一些时间,请稍等。

资源合作:cnki.scholar@cnki.net, +86-10-82896619   意见反馈:scholar@cnki.net

×