全部文献期刊会议图书|学者科研项目
中外文文献  中文文献  外文文献
作者:C.Z. Chen , S.W. Zhu ...
来源:[J].Results in Physics, 2017, Vol.7, pp.2588-2593
摘要:Abstract(#br)Tin oxide (SnO 2 ) thin films, doped with different concentrations of bismuth (Bi), are prepared by the magnetron reactive sputtering technique. Microstructural, spectroscopic and electric transport measurements are performed and the results have been correlated...
作者:C.Z. Chen , Y.X. Leng
来源:[J].Vacuum(IF 1.53), 2019, Vol.160, pp.226-232
摘要:Abstract(#br)Owing to its high ionization degree, high power pulsed magnetron sputtering (HPPMS) has proven advantageous for Cu film growth. In this study, Cu films with different thicknesses deposited by HPPMS at different peak powers were prepared. Moreover, a titanium (Ti) int...
作者:... W.L. Zhang , J.H. Zhang , C.Z. Chen
来源:[J].Ceramics International(IF 1.789), 2018, Vol.44 (6), pp.7228-7233
摘要:Abstract(#br)HA/BG composite films were deposited by pulsed laser, and a post heat treatment at 800 °C was followed to improve the properties of the films. The effect of heat treatment on the properties of PLD films was studied by SEM, XRD, FTIR, scratch test and in vivo tes...
作者:... H.J. Li , J.H. Zhang , C.Z. Chen
来源:[J].Ceramics International(IF 1.789), 2017, Vol.43 (1), pp.672-676
摘要:Abstract(#br)HA/BG composite films have been deposited on Ti-6Al-4V by pulse laser under O 2 atmosphere, and EPMA-EDS, SEM, XRD, FTIR measurements have been performed. Under O 2 atmosphere, the crystallinity of the deposited films increases and Ca/P atomic ratio slightly dec...
作者:C.Z. Chen , X.X. Yang ...
来源:[J].Ceramics International(IF 1.789), 2018, Vol.44 (12), pp.14528-14533
摘要:Abstract(#br)In order to improve the osteoconduction of metallic implants, bioactive films are often coated on the implant surfaces. In this paper, hydroxyapatite (HA) and bioglass (BG) composite films on Ti alloy were fabricated by pulsed laser deposition, and the effect of...
作者:... K. Zhang , C.Z. Chen , H.P. Yan
来源:[J].Journal of Sound and Vibration(IF 1.613), 2017, Vol.410, pp.35-48
摘要:Abstract(#br)This paper mainly focuses on the calculation and analysis on the radiation noise of the angular contact ball bearing applied to the ceramic motorized spindle. The dynamic model containing the main working conditions and structural parameters is established based on d...
作者:... H.J. Li , J.H. Zhang , C.Z. Chen
来源:[J].Materials Letters(IF 2.224), 2018, Vol.217, pp.316-319
摘要:Abstract(#br)HA/45S5 composite films were deposited by a KrF excimer laser on Ti-6Al-4 V, and a post annealing was carried out. HA/45S5 composite film deposited at 200 °C is amorphous, and the post annealing can’t promote the crystallization of 45S5 bioglass but can increase...
作者:C.Z. Chen , H. Sun ...
来源:[J].Vacuum(IF 1.53), 2017, Vol.135, pp.93-100
摘要:Abstract(#br)Copper (Cu) has been proposed as a well-known material for metallization in Si-based semiconductor devices because of its low resistivity, high chemical stability, and excellent electromigration resistance. In order to improve the properties of Cu films further,...
作者:... W.Z. Wang , K.D. Cheng , C.Z. Chen
来源:[J].Engineering Failure Analysis(IF 0.855), 2017, Vol.80, pp.253-262
摘要:Abstract(#br)A failure case of the outside coating on the process roller is presented in this study. The coating consists of WC-Co, which is deposited on 45 steel by High Velocity Oxygen Fuel (HVOF) spraying. The spalling of coatings has been found in the middle of the roller. Ru...

我们正在为您处理中,这可能需要一些时间,请稍等。

资源合作:cnki.scholar@cnki.net, +86-10-82896619   意见反馈:scholar@cnki.net

×