全部文献期刊会议图书|学者科研项目
中外文文献  中文文献  外文文献
作者:Anil Kumar Jain , Pulak M. Pandey
来源:[J].Ultrasonics(IF 2.028), 2017, Vol.77, pp.1-16
摘要:Abstract(#br)Un-deformed chip thickness is a critical parameter in machining processes. Measuring un-deformed chip thickness experimentally is a complicated process, especially in micro machining and may not even be measured accurately. The un-deformed chip thickness has an influ...
作者:Anil Kumar Jain
来源:[J].Indian Journal of Orthopaedics(IF 0.737), 2017, Vol.51 (3), pp.350-351
作者:Anil Kumar Jain
来源:[J].Indian Journal of Orthopaedics(IF 0.737), 2017, Vol.51 (3), pp.353-353
作者:Anil Kumar Jain , Pulak M. Pandey ...
来源:[J].The International Journal of Advanced Manufacturing Technology(IF 1.205), 2018, Vol.98 (5-8), pp.1267-1285
摘要:Abstract(#br)Selection of tooling to perform specific operations like drilling and milling on ceramic materials using rotary ultrasonic machining process is an important aspect to meet stringent dimensions on workpiece as well as intended performance of tool. This phenomenon...
作者:Anil Kumar Jain , Pulak M. Pandey
来源:[J].The International Journal of Advanced Manufacturing Technology(IF 1.205), 2016, Vol.85 (9-12), pp.2125-2138
摘要:Abstract(#br)Tool wear in micro-manufacturing process is of paramount importance to meet stringent design requirements of workpiece in a cost-effective manner. In present work, tool wear in micro-rotary ultrasonic machining (μ-RUM) has been investigated for Ø300-μm peck dril...
作者:Anil Kumar Jain , Namita Singh Saini ...
来源:[J].Indian Journal of Orthopaedics(IF 0.737), 2015, Vol.49 (3), pp.289-299
摘要:Background: Diffusion tensor imaging (DTI) is based upon the phenomenon of water diffusion known as "Brownian motion." DTI can detect changes in compressed spinal cord earlier than magnetic resonance imaging and is more sensitive to subtle pathological changes of the spinal ...
作者:Anil Kumar Jain , Pulak M. Pandey
来源:[J].Journal of Manufacturing Processes, 2016, Vol.22, pp.134-150
摘要:Abstract(#br)Right selection of process parameters is the most important decision to achieve superior quality of micro hole such as less edge chipping, less taper of hole and accurate diameter of drilled hole on brittle ceramic materials. Peck drilling methodology has been a...
作者:Anil Kumar Jain , Pulak M. Pandey
来源:[J].Materials and Manufacturing Processes(IF 1.297), 2017, Vol.32 (6), pp.598-607
摘要:ABSTRACT(#br)Comparative experimental investigations of µ-grinding and µ-rotary ultrasonic machining (µ-RUM) were made on borosilicate and Zerodur materials to know the efficacy of the processes for micro electro mechanical system (MEMS) application. The electroplated diamon...

我们正在为您处理中,这可能需要一些时间,请稍等。

资源合作:cnki.scholar@cnki.net, +86-10-82896619   意见反馈:scholar@cnki.net

×