全部文献期刊学位论文会议报纸专利标准年鉴图书|学者科研项目
中外文文献  中文文献  外文文献
作者:Ahmet N. Eraslan , Tunc Apatay
来源:[J].Journal of Thermal Stresses(IF 0.734), 2016, Vol.39 (8), pp.928-941Taylor & Francis
摘要:ABSTRACT(#br)An attempt is made to develop an analytical model for the prediction of thermal loading into a partially plastic state and unloading into an elastic state of a cylinder subjected to periodic boundary condition. The uncoupled theory of thermoelasticity is used as the ...
作者:Ahmet N. Eraslan , Turgut Tokdemir
来源:[J].International Journal of Thermal Sciences(IF 2.47), 2007, Vol.47 (3), pp.274-281Elsevier
摘要:Abstract(#br)A thermoelastic analytical solution of a variable thickness cooling fin problem is presented. A variable thickness annular fin mounted on a hot rotating rigid shaft is considered. The thickness of the fin is assumed to vary radially in a continuously variable nonline...
作者:Hakan Argeso , Ahmet N. Eraslan
来源:[J].International Journal of Thermal Sciences(IF 2.47), 2007, Vol.47 (2), pp.136-146Elsevier
摘要:Abstract(#br)The use of temperature-dependent physical properties in estimating the thermoelastic response of cylinders and tubes is assessed. A computational model in cylindrical polar coordinates is constructed for this purpose. The model incorporates experimental data to ...
作者:Eray Arslan , Ahmet N. Eraslan
来源:[J].International Journal of Solids and Structures(IF 1.871), 2013, Vol.50 (5), pp.806-814Elsevier
摘要:Abstract(#br)Analytical and computational models are developed to predict the stress response of functionally graded curved bars under pure bending in elastic and partially plastic states of stress. In the analytical model, the modulus of elasticity and in the computational ...
作者:Ahmet N. Eraslan , Tunc Apatay
来源:[J].ZAMM ‐ Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik(IF 0.948), 2017, Vol.97 (3), pp.340-357Wiley
摘要:An analytical model is developed to estimate partially plastic loading and unloading behavior of a transient internal energy cycling solid cylinder. The cylinder is initially at zero temperature, but for times greater than zero, heat is generated or consumed internally at a time ...
作者:Ahmet N. Eraslan , Yusuf Orcan
来源:[J].Journal of Thermal Stresses(IF 0.734), 2002, Vol.25 (6), pp.559-572Taylor & Francis
摘要:The objective of this study is to obtain the transient solution of the thermoelastic-plastic deformation of internal heat-generating tubes by considering the thermomechanical coupling effect and the temperature-dependent physical properties of the material. The previously develop...
作者:Ahmet N. Eraslan , Tolga Akis
来源:[J].Mechanics Based Design of Structures and Machines(IF 0.345), 2006, Vol.34 (3), pp.241-260Taylor & Francis
摘要:Abstract(#br)Analytical solutions to estimating the elastoplastic response of rotating functionally graded (FGM) hollow shafts with fixed ends are presented. The modulus of elasticity, as well as the uniaxial yield limit of the shaft material, are assumed to vary nonlinearly in t...
作者:Ahmet N. Eraslan
来源:[J].Journal of Thermal Stresses(IF 0.734), 2003, Vol.26 (2), pp.167-193Taylor & Francis
摘要:Analytical solutions are obtained for thermally induced axisymmetric elastic and elastic-plastic deformations in nonuniform heat-generating composite tubes with fixed ends. Thermoelastic solutions are obtained using four different boundary conditions: (i)free, (ii) radially const...
作者:Ahmet N. Eraslan , Tolga Akis
来源:[J].Mechanics Based Design of Structures and Machines(IF 0.345), 2003, Vol.31 (4), pp.529-561Taylor & Francis
摘要:Abstract(#br)Elastic–plastic stress distribution in a nonisothermal rotating annular disk is analyzed by the use of Tresca and von Mises criteria. An energy equation that accounts for the convective heat transfer with a variable heat transfer coefficient is modeled. For a gi...

我们正在为您处理中,这可能需要一些时间,请稍等。

资源合作:cnki.scholar@cnki.net, +86-10-82896619   意见反馈:scholar@cnki.net

×