全部文献期刊会议图书|学者科研项目
中外文文献  中文文献  外文文献
作者:Jing Li , Biao Li , NanYan Shen ...
来源:[J].The International Journal of Advanced Manufacturing Technology(IF 1.205), 2017, Vol.89 (9-12), pp.2919-2933
摘要:The milling robots have many advantages compared with the traditional numerical control machine, but the chatter phenomenon in the robotic milling obstructs its popularization. Therefore, the chatter problem in the planar milling by robot is discussed in the way of cutter path an...
作者:Bin Jiang , Tiantian He , Yunpeng Gu ...
来源:[J].The International Journal of Advanced Manufacturing Technology(IF 1.205), 2017, Vol.92 (1-4), pp.139-150
摘要:Under the influence of a high-speed, interrupted-cutting impact load, a great difference is existed among the internal load propagation of a milling cutter. Furthermore, the cutter damage caused by partial particle severe vibration has restricted the improvement of a high-speed milling...
作者:Yishu Hao , Yang Liu
来源:[J].The International Journal of Advanced Manufacturing Technology(IF 1.205), 2017, Vol.93 (5-8), pp.2289-2297
摘要:... The milling surface roughness prediction of thin-walled parts with curved surface and physical factors are studied in this paper. Based on the theory of milling process, modeling theory of differential geometry and computer graphic, a milling surface roughness prediction ...
作者:Yanli He , Huanan Qing , Shengguang Zhang ...
来源:[J].The International Journal of Advanced Manufacturing Technology(IF 1.205), 2017, Vol.93 (5-8), pp.1829-1842
摘要:... However, mechanical machining such as milling is often required for part finishing in order to meet the dimensional accuracy before assembly. The milling process is vulnerable to damage like fiber breakage and pullout, and delamination. The cutting force is generally recogniz...
作者:Seyed Ali Niknam
来源:[J].The International Journal of Advanced Manufacturing Technology(IF 1.205), 2017, Vol.91 (1-4), pp.1079-1089
摘要:Among conventional machining operations, milling burr formation has a very complex mechanism. According to the review of literature, exit up milling side burr is the longest and thickest milling burr that needs to be avoided or at least reduced through manipulating effective bur...
作者:D. Yu. Pimenov , V. I. Guzeev , T. Mikolajczyk ...
来源:[J].The International Journal of Advanced Manufacturing Technology(IF 1.205), 2017, Vol.92 (9-12), pp.4473-4486
摘要:A study of the influence of processing parameters and tool wear on the total elastic displacements of the technological system is based on a mathematical model of elastic displacements during face milling. The mathematical model takes into account both plane-parallel and angular...
作者:Yongjian Ji , Xibin Wang , Zhibing Liu ...
来源:[J].The International Journal of Advanced Manufacturing Technology(IF 1.205), 2017, Vol.92 (1-4), pp.1185-1200
摘要:... For purposes of monitoring the processing state of milling process and detecting chatter timely, a novel online chatter detection method was proposed. In the proposed method, the acceleration signals acquired by sensor were decomposed into a series of intrinsic mode functions...
作者:Caixu YUE , Cui HUANG , Xianli LIU ...
来源:[J].Chinese Journal of Mechanical Engineering(IF 0.263), 2017, Vol.30 (2), pp.286-293
摘要:To optimize milling force and machining accuracy quality in corner milling process, the changing law of milling force is revealed by Finite Element Method(FEM). Based on DEFORM software a serial of 3D FEM models for corner milling process are devloped. Tool curved trajectory is a...
作者:J. J. Wang , C. F. Sung
来源:[J].The International Journal of Advanced Manufacturing Technology(IF 1.205), 2017, Vol.89 (9-12), pp.2803-2819
摘要:Analyzing the characteristics of force and tool vibration trajectories during stable and unstable milling processes provides information such as the shape, orientation, and sense of rotation of these trajectories; such information facilitates positively identifying machine chatte...
作者:Jian-wei Ma , Zhen-yuan Jia , De-ning Song ...
来源:[J].The International Journal of Advanced Manufacturing Technology(IF 1.205), 2017, Vol.92 (1-4), pp.1493-1506
摘要:Flat-end milling is an important processing method that has been widely used for complex parts machining in aerospace, biomedical and automotive industries. As the milling force is an important physical parameter to comprehensively reflect the milling process, its prediction is o...

我们正在为您处理中,这可能需要一些时间,请稍等。

资源合作:cnki.scholar@cnki.net, +86-10-82896619   意见反馈:scholar@cnki.net

×