全部文献期刊学位论文会议报纸专利标准年鉴图书|学者科研项目
中外文文献  中文文献  外文文献
作者:F. F. Wu , S. T. Li , G. A. Zhang ...
来源:[J].Bulletin of Materials Science(IF 0.584), 2014, Vol.37 (5), pp.1153-1157Springer
摘要:Abstract(#br)The microstructural evolution and mechanical properties of a hypereutectic Al-Si alloy processed by liquid die forging were investigated. It is found that the grain size of the primary Si was significantly reduced by liquid die forging with increased pressure. The ...
作者:F. Yin , G.X. Wang , S.Z. Hong ...
来源:[J].Journal of Materials Processing Tech.(IF 1.953), 2003, Vol.139 (1), pp.462-464Elsevier
摘要:Abstract(#br)The aluminum alloy connecting rod of an air compressor was manufactured with liquid die forging replacing die casting and hot die forging. Not only were the defects of gas holes, porosity and non-metal inclusions in the die casting eliminated, but also the investment...
作者:Nan LI , Shu-ming XING , Pei-wei BAO
来源:[J].Journal of Iron and Steel Research International(IF 0.292), 2013, Vol.20 (6), pp.58-62Elsevier
摘要:Abstract(#br)The microstructure and mechanical properties of nodular cast iron produced by the melted metal die forging process (MMDF for short) were experimentally researched. The main obtained results are: the nodular cast iron produced by this process can be machined as easy a...
作者:Nan Li , Shu-ming Xing , Pei-wei Bao
来源:[J].Journal of Iron and Steel Research International(IF 0.292), 2013, Vol.20 (6), pp.58-62Springer
摘要:Abstract(#br)The microstructure and mechanical properties of nodular cast iron produced by the melted metal die forging process (MMDF for short) were experimentally researched. The main obtained results are: the nodular cast iron produced by this process can be machined as easy a...
作者:Gui Rong Yang , Wen Ming Song , Ying Ma ...
来源:[J].Advanced Materials Research, 2012, Vol.1584, pp.1213-1217Trans Tech
摘要:The copper specimen was fabricated through liquid die forging under different preheating temperature of mold condition. The effect of preheating temperature of mold on the microstructure, density, hardness, tensile strength and electrical conductivity were investigated. The r...
作者:曹广祥
来源:[D].哈尔滨工业大学  2010CNKI
摘要:液态模锻是一种近净成形技术,可以成形形状复杂的制件,且力学性能接近锻件,为复杂制件成形开辟了一条新路。本文以2A50铝合金为材料,一种负重轮为研究对象,通过数值模拟和简单加载液态模锻成形实验...
被引频次:2下载频次:184
作者:周启波
来源:[D].兰州理工大学  2009CNKI
摘要:液态模锻是一种优质、高效的工艺方法,在合理的工艺参数下,能保证做出内部组织致密、表面光洁度高、力学性能优良的试样。采用控制其它工艺参数不变而只让其中一个参数在一定范围内变化的方法制...
被引频次:-下载频次:115
作者:诸葛跃 , 王家宣 , 李春
来源:[J].热加工工艺, 2009, (07), pp.80-82CNKI
摘要:液态模锻工艺属于液态体积成形,是一种优质、高效、经济的成形工艺。介绍了5083铝合金法兰盘液态模锻模具的结构和工作特点,对模具设计的主要参数和法兰盘液态模锻工艺参数的选取进行了阐述。
被引频次:6下载频次:154
作者:洪慎章
来源:[J].精密成形工程, 2012, (03), pp.64-66CNKI
摘要:叙述了铝合金液态模锻成形的工艺实质、方法及其特点。阐述了铝合金液态模锻工艺的优点。介绍了液态模锻成形轿车零件的应用实例,指出了铸造技术和模锻技术有机结合成先进的液态模锻成形工艺是一...
被引频次:2下载频次:101
作者:王瑾
来源:[J].陕西理工学院学报(自然科学版), 2006, (03), pp.41-43+54CNKI
摘要:采用半固态搅拌工艺和液态模锻方法制备了SiCp/ZL201复合材料。用光学金相显微镜、扫描电子显微镜和力学性能试验研究了复合材料的显微组织、力学性能和断口形貌特征。结果表明:复合材料中SiC颗粒分布较...
被引频次:9下载频次:65

我们正在为您处理中,这可能需要一些时间,请稍等。

资源合作:cnki.scholar@cnki.net, +86-10-82896619   意见反馈:scholar@cnki.net

×