全部文献期刊会议图书|学者科研项目
中外文文献  中文文献  外文文献
作者:Matthew Jian-Qiao Peng , Hai-Yan Chen , Yong Hu ...
来源:[J].BMC Musculoskeletal Disorders(IF 1.875), 2017, Vol.18 (1)Springer
摘要:There is no universal hip implant suitably fills all femoral types, whether prostheses of porous short-stem suitable for Hip Arthroplasty is to be measured scientifically.
作者:Michiaki Miura , Junichi Nakamura , Yusuke Matsuura ...
来源:[J].BMC Musculoskeletal Disorders(IF 1.875), 2017, Vol.18 (1)Springer
摘要:Finite element analysis (FEA) of the proximal femur has been previously validated with large mesh size, but these were insufficient to simulate the model with small implants in recent studies. This study aimed to validate the proximal femoral computed tomography (CT)-based specim...
作者:Jen-Chung Liao , Weng-Pin Chen , Hao Wang
来源:[J].BMC Musculoskeletal Disorders(IF 1.875), 2017, Vol.18 (1)Springer
摘要:... The purpose of this study was to use finite element (FE) analysis to determine the effect of treating thoracolumbar burst fractures by short-segment pedicle screw fixation using a combination of two additional pedicle screws and vertebroplasty at the level of the fracture.
作者:Chenpu Guo , M. Elchalakani , A. Karrech ...
来源:[J].Thin-Walled Structures(IF 1.231), 2020, Vol.147
摘要:... This paper aims to use the Finite Element (FE) method to understand the behaviour of cold-formed CHS under pure bending and to propose new design rules. The model is calibrated by comparing its predicted load-deflection curves with previously published experimental data. In t...
作者:Chia-Hsuan Li , Cheng-Hsien Wu , Chun-Li Lin
来源:[J].Journal of the Mechanical Behavior of Biomedical Materials(IF 2.368), 2020, Vol.105
摘要:... A finite element (FE) model was constructed and the defect region was defined from the unilateral first premolar to the second molar. The reconstruction implant included main body, fixation wing and dental prosthesis. Standard topology optimization was performed using stress ...
作者:Jia-Bao Yan , Yian Chen , Xuchuan Lin
来源:[J].Thin-Walled Structures(IF 1.231), 2020, Vol.148
摘要:... A three-dimensional solid-element based finite element model (FEM) was developed to simulate structural behaviours of beam-to-column joints. The FEM was validated by the reported cyclic test results. FE parametric studies were then performed to investigate the influences of d...
作者:Wencan Zhang , Junyong Zhao , Le Li ...
来源:[J].Computer Methods and Programs in Biomedicine(IF 1.555), 2020, Vol.187
摘要:... Our research is aimed to assess the stability and strength of the TCPS in thoracic vertebrae under osteoporotic condition by three dimensional (3D) finite element method on the basis of medical image reconstruction using computed tomography (CT), and verifying its effecti...
作者:Emrah Afsar , Ferruh Taspinar , Bilge Basakci Calik ...
来源:[J].Journal of the Brazilian Society of Mechanical Sciences and Engineering(IF 0.234), 2017, Vol.39 (4), pp.1061-1067Springer
摘要:The aim of this studywas to determine stresses of the structures of the knee using the finite element method in patients with knee osteoarthritis with different Q angles. The study comprised 26 female patients with right knee osteoarthritis. The patients with the largest, the...
作者:Aysa Ayali , Kani Bilginaylar
来源:[J].Head & Face Medicine(IF 0.981), 2017, Vol.13 (1)Springer
摘要:... The aim of this three dimensional finite element analysis (3D FEA) study was to evaluate the biomechanical effects of implant diameter in case of facial trauma (2000 N) to an edentulous atrophic mandible with two implant supported overdenture.
作者:Fan Tang , Yong Zhou , Wenli Zhang ...
来源:[J].Journal of Orthopaedic Surgery and Research(IF 1.013), 2017, Vol.12 (1)Springer
摘要:... This study aimed to investigate the biomechanics of the distal femur reconstructed with APT tumor knee prostheses using finite element (FE) analysis based on our previous, promising clinical outcome.

我们正在为您处理中,这可能需要一些时间,请稍等。

资源合作:cnki.scholar@cnki.net, +86-10-82896619   意见反馈:scholar@cnki.net

×