全部文献期刊会议图书|学者科研项目
中外文文献  中文文献  外文文献
作者:Xin-ping Hu , Li Fang , Jun-xiang Zhou ...
来源:[J].China Foundry(IF 0.346), 2017, Vol.14 (2), pp.98-107
摘要:Thermal analyses on squeeze cast aluminum alloy A380 (SC A380) solidified under 90 MPa were carried out to study the microstructure development of the alloy, in which a differential scanning calorimeter (DSC) was employed. During the DSC runs, heating and cooling rates of 1, ...
作者:Mohd Danish , Turnad Lenggo Ginta , Khairul Habib ...
来源:[J].The International Journal of Advanced Manufacturing Technology(IF 1.205), 2017, Vol.91 (5-8), pp.2855-2868
摘要:... The analysis pointed out that the maximum temperature was greatly affected by the cutting speed followed by feed rate and depth of cut. Cryogenic machining leads to better surface finish with up to 56% reduction in surface roughness compared with dry machining.
作者:Susan A. Bernal , Maria C. G. Juenger , Xinyuan Ke ...
来源:[J].Materials and Structures(IF 1.184), 2017, Vol.50 (1)
摘要:Working Group 1 of RILEM TC 238-SCM ‘Hydration and microstructure of concrete with supplementary cementitious materials (SCMs)’ is defining best practices for the physical and chemical characterization of SCMs, and this paper focusses on their thermal analysis. Thermogravime...
作者:Jongmin Kim
来源:[J].International Journal of Thermophysics(IF 0.568), 2017, Vol.38 (10)
摘要:In this paper, a thermal analysis of the thermal protection system (TPS) of test launch vehicle (TLV) is explained. TLV is heated during the flight due to engine exhaust plume gas by thermal radiation and a TPS is needed to protect the vehicle from the heating. The thermal analysis...
作者:Feng Tan , Qin Yin , Guanhua Dong ...
来源:[J].The International Journal of Advanced Manufacturing Technology(IF 1.205), 2017, Vol.91 (5-8), pp.2549-2560
摘要:Accurate calculation of convective heat transfer coefficients (CHTCs) is the premise to obtain accurate results of finite element thermal analysis (FETA). This paper presents an optimization method of CHTCs in steady state FETA of a spindle system using genetic algorithm (GA), wh...
作者:Qi Xu , Song Chen
来源:[J].Integration, the VLSI Journal(IF 0.414), 2017, Vol.59, pp.157-167
摘要:... However, the thermal challenge in industry is one of key obstacles to adopt the 3D ICs technology. Various thermal analysis models for 3D IC have been proposed in literature. However, the long simulation cycle makes runtime of thermal management inefficient during floorplanni...
作者:Austėja Diktanaitė , Giedrė Gaidamavičienė , Edvardas Kazakevičius ...
来源:[J].Thermochimica Acta(IF 1.989), 2020, Vol.685
摘要:... Additionally, it was also showed that thermal analysis is a powerful method that enables the observation of several important processes, which are closely related to the decomposition of volatile compounds, phase transitions and stability of intermediates. Besides, it was d...
作者:K. Swaminathan , D.M. Sangeetha
来源:[J].Composite Structures(IF 2.231), 2017, Vol.160, pp.43-60
摘要:Abstract(#br)Functionally Graded Materials (FGMs) are the advanced materials in the field of composites, which can resist high temperatures and are proficient in reducing the thermal stresses. In recent decades, significant investigations are reported in the predicting the respon...
作者:Jorge E.P. Navalho , José M.C. Pereira , José C.F. Pereira
来源:[J].Applied Thermal Engineering(IF 2.127), 2017, Vol.112, pp.1510-1522
摘要:Abstract(#br)Thermal analysis and management studies are commonly conducted from early design stages of new products by numerical means. However, the application of three-dimensional tools for evaluating the thermal performance of multi-component systems, exhibiting high geo...
作者:M. Mohanraj , S. Jayaraj , C. Muraleedharan
来源:[J].International Journal of Thermal Sciences(IF 2.47), 2015, Vol.90, pp.150-172
摘要:Abstract(#br)Artificial neural networks (ANN) have been widely used for thermal analysis of heat exchangers during the last two decades. In this paper, the applications of ANN for thermal analysis of heat exchangers are reviewed. The reported investigations on thermal analysis of...

我们正在为您处理中,这可能需要一些时间,请稍等。

资源合作:cnki.scholar@cnki.net, +86-10-82896619   意见反馈:scholar@cnki.net

×