全部文献期刊会议图书|学者科研项目
中外文文献  中文文献  外文文献
作者:T. Gailliegue , T. Doca , J.A. Araújo ...
来源:[J].Theoretical and Applied Fracture Mechanics(IF 0.628), 2020, Vol.106
摘要:Abstract(#br)This study investigates the effect of the phase angle between fretting and fatigue loads on the life of Al7050-T7451 aluminum alloy specimens. Tests with phase angles of 0 ° , 4 5 ° , 9 0 ° and 13 5 ° are carried out using a bi-actuator system which permits ...
作者:F. Abbasi , G.H. Majzoobi
来源:[J].Engineering Fracture Mechanics(IF 1.413), 2018, Vol.188, pp.93-111
摘要:Abstract(#br)In the present study, the effect of phase difference between axial and normal contact loads on fretting behavior of Aluminum alloy 7075-T6 is investigated using a new testing and numerical simulation using finite element method. The results showed that the phase dif...
作者:M. Ciavarella
来源:[J].Engineering Fracture Mechanics(IF 1.413), 2018, Vol.192, pp.205-209
摘要:Abstract(#br)Fretting fatigue has been studied mainly with constant normal load. Abbasi and Majzoobi (2017) suggest an new testing method where contact pressure can be independently varied during the test. The authors compare the case of constant normal load, with that of in ph...
作者:Q. Wang , C. Xin , Q. Sun ...
来源:[J].International Journal of Fatigue(IF 1.976), 2018
摘要:Abstract(#br)Biaxial fatigue behavior of gradient structural pure titanium fabricated by surface nanocrystallization technique (SNC) was investigated under in-phase (IP) and out-of-phase (OP) loading. The fatigue life of SNC Ti under 90° OP loading is shorter than that under IP ...
作者:Lin Xiao , Yukichi Umakoshi , Jun Sun
来源:[J].Materials Science & Engineering A(IF 2.108), 2000, Vol.292 (1), pp.40-48
摘要:Abstract(#br)Biaxial fatigue tests were performed for Zircaloy-4 (Zr-4) under in-phase (IP) and out-of-phase (OP) loading. Effects of the principal strain ratio ( ε 3 / ε 1 ), phase angle ( Φ ) and the equivalent strain range (Δ ε eq ) on the biaxial cyclic hardening, fa...
作者:C. Gómez , M. Canales , S. Calvo ...
来源:[J].International Journal of Fatigue(IF 1.976), 2010, Vol.33 (4), pp.578-587
摘要:Abstract(#br)The objective of the present work is to estimate the high and low cycle fatigue life of a type of welding steel used for construction (S355 J2 according to UNE EN 10025-2: 2006), subject to in-phase and out-of-phase multiaxial loading, by means of different classi...
作者:M. Noban , H. Jahed , E. Ibrahim ...
来源:[J].International Journal of Fatigue(IF 1.976), 2011, Vol.37, pp.123-133
摘要:... This effect becomes noticeable when applying a 90° out-of-phase loading, reducing the fatigue life by a factor up to 5. It has been shown that the material has no additional hardening due to out-of-phase loading. To account for this severe path dependency, a material dep...
作者:Nadeem Ali Bhatti , Magd Abdel Wahab
来源:[J].Tribology International(IF 1.536), 2017, Vol.115, pp.307-318
摘要:Abstract(#br)This study focuses on application of critical plane approach to in-phase and out-of-phase loading conditions in fretting fatigue problems. The efficacy of various multiaxial damage criteria is analysed to determine critical plane orientation and initiation life,...
作者:Xuejun Chen , Xiaodong Zhu
来源:[J].Tribology International(IF 1.536), 2019, Vol.134, pp.165-177
摘要:Abstract(#br)The fretting fatigue behavior of functionally graded material (FGM) coatings under the out-of-phase loading condition is investigated in this work. A numerical model is developed by using the finite element method. Dimensional analysis is utilized to identify various...
作者:Alexandre Bolchoun , Jörg Baumgartner , Heinz Kaufmann
来源:[J].International Journal of Fatigue(IF 1.976), 2017, Vol.101, pp.159-168
摘要:Abstract(#br)Depending on material ductility out-of-phase loads can result in fatigue life increase or fatigue life reduction compared to in-phase loading. Especially the latter case is crucial and must be taken into account as fatigue life evaluation is performed.(#br)Area cove...

我们正在为您处理中,这可能需要一些时间,请稍等。

资源合作:cnki.scholar@cnki.net, +86-10-82896619   意见反馈:scholar@cnki.net

×