全部文献期刊会议图书|学者科研项目
中外文文献  中文文献  外文文献
作者:Xiyuan Wang , Fu Liu , Ying Song ...
来源:[J].Surface & Coatings Technology(IF 1.941), 2019, Vol.364, pp.81-88
摘要:Abstract(#br)Corrosion resistance and bio-performance of NiTi alloy is clinically important for osteointegrated implants with long-term performance. Though Al 2 O 3 coating fabricated on NiTi alloy by the cathodic plasma electrolytic deposition (CPED) could effectively reduce ...
作者:Jithin J. Marattukalam , Vamsi K. Balla , Mitun Das ...
来源:[J].Journal of Alloys and Compounds(IF 2.39), 2018, Vol.744, pp.337-346
摘要:Abstract(#br)The aim of this work is to study the effect of heat treatment on the microstructure, phase transformations, shape memory characteristics and corrosion behaviour of laser deposited equiatomic NiTi alloy. Dense samples of NiTi alloy were fabricated using Laser Engine...
作者:Xuping Zhang , Guiji Wang , Binqiang Luo ...
来源:[J].Journal of Alloys and Compounds(IF 2.39), 2018, Vol.731, pp.569-576
摘要:Abstract(#br)Understanding the behavior of near equi-atomic NiTi alloys under high strain rates and high pressures is important for the development of shock mitigating structures, particularly those that protect satellite and space vehicles from the impact of hyper velocity s...
作者:Jia-Lu Wan , Zhi-Bin Chen , Sheng-Jian Qin ...
来源:[J].Computational Materials Science(IF 1.878), 2018, Vol.153, pp.119-125
摘要:Abstract(#br)Molecular dynamics simulations are performed to study the influence of hydrostatic pressure P on the thermally induced phase transformations in NiTi alloy during thermal cycling between 500 K and 5 K. It is found that the martensitic transformation path shows stro...
作者:Xiyuan Wang , Fu Liu , Ying Song
来源:[J].Surface & Coatings Technology(IF 1.941), 2018, Vol.344, pp.288-294
摘要:Abstract(#br)Hydroxyapatite (HA)-containing Al 2 O 3 coatings were prepared on NiTi alloys through a cathodic plasma electrolytic deposition (CPED) process, followed by hydrothermal treatment (HT). The surface morphology, elemental distribution and phase composition of each ...
作者:Hao Wang , Jens Jürgensen , Peer Decker ...
来源:[J].Applied Surface Science(IF 2.112), 2020, Vol.501
摘要:Abstract(#br)Laser shock peening with femtosecond laser was used to improve the corrosion resistance of biomedical NiTi alloy without protective coating in the air environment. The energy dispersive X-ray analysis (EDX) and X-ray diffraction (XRD) based analysis showed that ...
作者:Naofumi Ohtsu , Yuma Hirano , Koudai Takiguchi
来源:[J].Surface & Coatings Technology(IF 1.941), 2018, Vol.335, pp.306-313
摘要:Abstract(#br)The present study discusses the effect of the electrolyte on the growth of an oxide layer on NiTi alloy via anodic treatment with the aim of understanding the surface reactions that occur during the anodization process. For this purpose, anodic treatments of NiTi sub...
作者:Ke Zhang , Han Zhang , Ping Liu ...
来源:[J].Vacuum(IF 1.53), 2018
摘要:Abstract(#br)Graphene oxide (GO) coating was prepared on the surface of a NiTi shape-memory alloy via a simple and practical electrophoretic deposition method from an aqueous suspension containing GO at low temperatures. The coating was characterized by field emission scanning...
作者:Ping Dong , Weichang Hao , Xu Wang ...
来源:[J].Thin Solid Films(IF 1.604), 2007, Vol.516 (16), pp.5168-5171
摘要:Abstract(#br)NiTi alloy has been used widely as biomaterials. But because of toxic effects possibly caused by excess Ni ions released during the corrosion process in the physiological environment, it is still a controversial material. Fabricating medicine-loaded coating, which ...
作者:Chunyang Zhao , Hailong Liang , Shuncun Luo ...
来源:[J].Journal of Alloys and Compounds(IF 2.39), 2020, Vol.817
摘要:Abstract(#br)Selective laser melting (SLM) is used to fabricate near-equiatomic NiTi alloy from Ni–Ti mixed element powders. The influence of energy input on formability, microstructure, phase transition and shape memory effect of the NiTi alloy (atomic ratio is 1:1) is stud...

我们正在为您处理中,这可能需要一些时间,请稍等。

资源合作:cnki.scholar@cnki.net, +86-10-82896619   意见反馈:scholar@cnki.net

×