全部文献期刊会议图书|学者科研项目
中外文文献  中文文献  外文文献
作者:Bernd Zwingmann , Yue Liu , Mike Schlaich ...
来源:[J].Composite Structures(IF 2.231), 2017, Vol.178, pp.110-118
摘要:... The laminated loop anchorages of pin-loaded straps are strong and lightweight force locking connections. However, the load bearing capacity of those anchorages is limited to about 70 % of the tension members’ breaking load due to the superposition of tension and bending s...
作者:Darragh S. Egan , Denis P. Dowling
来源:[J].Journal of the Mechanical Behavior of Biomedical Materials(IF 2.368), 2020, Vol.106
摘要:...(#br)It was demonstrated that as the level of input energy decreased and the number of affected layers increased, a corresponding decrease in the load bearing capacity of the structures occurred. With the structures experiencing a significant loss in strength also exhibit...
作者:Hanry Yang , Lin Jiang , Martin Balog ...
来源:[J].Metallurgical and Materials Transactions A(IF 1.627), 2017, Vol.48 (9), pp.4385-4392
摘要:The length-scale effects on the load bearing capacity of reinforcement particles in an ultrafine-grained metal matrix composite (MMC) were studied, paying particular attention to the nanoscale effects. We observed that the nanoparticles provide the MMCs with a higher strength but...
作者:Yaofeng Xie , Chenglin Liu , Suyang Gao ...
来源:[J].Ocean Engineering(IF 1.161), 2017, Vol.142, pp.377-387
摘要:Abstract(#br)Understanding the lateral load behavior of high-piled wharf is of practical value to structural design, and the horizontal load bearing capacity of the bent is essential to analyzing the behavior of the high-piled wharf. In this paper, finite element models of hig...
作者:S. Cicero , V. Madrazo , T. García ...
来源:[J].Engineering Failure Analysis(IF 0.855), 2013, Vol.29, pp.108-121
摘要:Abstract(#br)This paper presents an analysis of the notch effect in the load bearing capacity, the apparent fracture toughness and the fracture mechanisms of four different materials: polymer PMMA, aluminium alloy Al7075-T651, and structural steels S275JR and S355J2 within their ...
作者:Jong-hyun Baek , Young-pyo Kim , Woo-sik Kim ...
来源:[J].Materials Science & Engineering A(IF 2.108), 2012, Vol.540, pp.70-82
摘要:... A closing or opening in-plane bending load was applied to the dented pipes pressurized under an internal pressure equivalent to atmospheric pressure as well as pressures of 4, 8, and 16 MPa. The FE analyses results showed that the plastic collapse behavior of the dented p...
作者:R. Akbari Alashti , S. Jafari , S.J. Hosseinipour
来源:[J].Engineering Failure Analysis(IF 0.855), 2015, Vol.47, pp.208-228
摘要:... The target dent depth is considered as an indication of the load bearing capacity of the pipe under indentation process by a rigid spherical indenter. To validate numerical calculations, a series of experimental tests are conducted on the pipe with atmospheric pressure. ...
作者:Xiaoguang Song , Yingying Zhang , Qilin Zhang
来源:[J].International Journal of Steel Structures(IF 0.297), 2017, Vol.17 (4), pp.1341-1352
摘要:This paper presents the research on failure modes and loading bearing capacity of two types of purlin-sheet roofs under uniform loadings. The full-size experiments are carried out on the purlin-sheet roofs and the allowable design stress and design proposals are proposed. Besides...
作者:Piero Iori , Moacir de Souza Dias Junior , Ayodele Ebenezer Ajayi ...
来源:[J].Ciência e Agrotecnologia(IF 0.395), 2013, Vol.37 (2), pp.130-137
摘要:... The objective of this study was to compare the load bearing capacity models obtained with controlled moisture in laboratory and those obtained with natural field moistures determined a long one year. The evaluation of soil structural sustainability follows four distinct st...
作者:Gelen Gael Chewe Ngapeya , Danièle Waldmann , Franck Scholzen
来源:[J].Construction and Building Materials(IF 2.293), 2018, Vol.165, pp.898-913
摘要:... This paper studies the effect of ΔH on the structural response and the load bearing capacity of masonry walls by highlighting the load percolation. Furthermore, an algorithm was developed to define a stress multiplier coefficient respecting the imperfections ΔH. The al...

我们正在为您处理中,这可能需要一些时间,请稍等。

资源合作:cnki.scholar@cnki.net, +86-10-82896619   意见反馈:scholar@cnki.net

×