全部文献期刊会议图书|学者科研项目
中外文文献  中文文献  外文文献
作者:Qiao Lu , Chao Liu , Delong Zhao ...
来源:[J].Atmospheric Research(IF 2.2), 2020, Vol.240
摘要:... By modifying the optical properties, different BC geometries and size distributions result in uncertainties in RF and heating rate less than 30%, while the uncertainty in heating rate due to different BC mixing states is as large as ~80%. The vertical distribution of BC conce...
作者:Selim Demirci , Tuncay Dikici , Mehmet Masum Tünçay ...
来源:[J].Applied Surface Science(IF 2.112), 2020, Vol.507
摘要:Abstract(#br)In this work, ZnO particles were fabricated by sol-gel method at different heating rate at 500 °C for 2 h. The ZnO powders were analysed by X-ray diffraction (XRD), scanning electron microscopy (SEM), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), U...
作者:Ranjit Singh , Harpreet Singh Kainth
来源:[J].Nuclear Inst. and Methods in Physics Research, B(IF 1.266), 2018, Vol.426, pp.22-29
摘要:Abstract(#br)The luminiscence characteristics of thermoluminscence dosimeter LiF: Mg, Ti (TLD-100) irradiated to X-rays from 6 MV linac have been studied for wide range of 2–50 K/s readout linear heating rates. The reproducibility of glow curves for TLDs is found to be bett...
作者:Paul Malumba , Lynn Doran , Sabine Danthine ...
来源:[J].LWT(IF 2.546), 2018, Vol.88, pp.196-202
摘要:Abstract(#br)The effect of heating rate on structural and functional properties of wheat and potato starch-water systems were analyzed in term of gelatinization, swelling and pasting behavior as well as in terms of textural and flow characteristics of gels recovered. Gelatinizati...
作者:Mingqi Zhao , Yuan Xing , Zhihong Jia ...
来源:[J].Journal of Alloys and Compounds(IF 2.39), 2016, Vol.686, pp.312-317
摘要:Abstract(#br)Effects of heating rate on hardness and microstructure of Al-Cu and Al-Cu-Zr-Ti-V alloys were investigated by means of scanning electron microscope (SEM), electro-probe microanalyzer (EPMA) and transmission electron microscopy (TEM). The cast alloys were heat trea...
作者:Yongqian Xu , Lihua Zhan , Ziyao Ma ...
来源:[J].Materials Science & Engineering A(IF 2.108), 2017, Vol.688, pp.488-497
摘要:... However, it is inevitable to impose a slow heating rate to heat the component and the tooling up for CAF application. The effect of the heating rate (1, 3 and 5 °C/min) on creep aging behavior of Al-Cu-Mg alloy is investigated. It is found that the creep deformation during...
作者:Li Hanjian , Chi Huanying , Hu Song ...
来源:[J].Fuel Processing Technology(IF 2.816), 2020, Vol.197
摘要:... 4 heating rates of 4.0 °C/s, 15.1 °C/s, 52.4 °C/s and 69.4 °C/s were realized by adjusting the voltage-up rates of the heating lamps. The temperature, image, gas emission, and mass loss were synchronously detected and the reliabilities of data were strictly verified. Coa...
作者:X.B. Zhai , Y.G. Wang , L. Zhu ...
来源:[J].Journal of Non-Crystalline Solids(IF 1.597), 2018, Vol.499, pp.337-343
摘要:Abstract(#br)Atom migration, phase structure and magnetic properties in the Fe 82 Si 2 B 11 P 4 Cu 1 amorphous alloy isothermally annealed at various heating rates are investigated. Annealing the samples at a high heating rate promotes the formation of Cu-rich regions and delays ...
作者:Bo Wang , Fanfan Xu , Peijie Zong ...
来源:[J].Renewable Energy(IF 2.989), 2018
摘要:Abstract(#br)In this work, the effects of heating rate on fast pyrolysis behavior and product distribution of Jerusalem artichoke stalk (JAS) were investigated fist by TG-FTIR (heating rates: 20, 30, 50, 100, 300, 500 °C/min) and then via Py-GC/MS (heating rates: 100, 1000, 50...
作者:S. Septien , F.J. Escudero Sanz , S. Salvador ...
来源:[J].Energy(IF 3.651), 2018, Vol.142, pp.68-78
摘要:Abstract(#br)This work, performed in the context of Gaya project, focuses on the characterization and modelling of the effect of the pyrolysis heating rate on the steam gasification of char from woodchips. An experimental work was performed based on thermogravimetry and solid cha...

我们正在为您处理中,这可能需要一些时间,请稍等。

资源合作:cnki.scholar@cnki.net, +86-10-82896619   意见反馈:scholar@cnki.net

×