全部文献期刊会议图书|学者科研项目
中外文文献  中文文献  外文文献
作者:R.-T. Guo , W.-G. Pan , X.-B. Zhang ...
来源:[J].Energy Sources, Part A: Recovery, Utilization, and Environmental Effects(IF 0.516), 2014, Vol.36 (1), pp.1-4
摘要:... Further, magnesia is the heat decomposition product of magnesite. The effect of magnesite heat decomposition temperature on the dissolution rate of magnesium hydrate is investigated in this study. As can be seen from the experimental results, magnesium hydrate dissolution ra...
作者:Liao Shuzhi , Zhang Bangwei , Shu Xiaolin ...
来源:[J].Journal of Materials Processing Tech.(IF 1.953), 1999, Vol.89, pp.405-409
摘要:Abstract(#br)Alumina ceramics has been used widely as an industrial material because of its high heat resistance and excellent wear resistance. Nanosize metal oxide used as raw materials would decrease the sintering temperature of ceramics and enable their physical and chemica...
作者:Qiuren Ou, Peijun Ji, Jun Xiao and Ling Wu
来源:[J].Fluid Dynamics & Materials Processing, 2019, Vol.15 No.1 2019 (1 2019), pp.27-37
摘要:... The results showed that the temperature of cyanate ester suitable for RTM process was 70℃. Curing process of the resin was 130℃/2 h+160℃/2 h+200℃/2 h+220℃/4 h. Glass transition temperature and heat decomposition temperature of the cured resin are 289℃ and 41...
作者:QiurenOu , PeijunJi , JunXiao ...
来源:[J].Fluid Dynamics & Materials Processing, 2019, Vol.15 (1), pp.27-37
摘要:... The results showed that the temperature of cyanate ester suitable for RTM process was 70℃. Curing process of the resin was 130℃/2 h+160℃/2 h+200℃/2 h+220℃/4 h. Glass transition temperature and heat decomposition temperature of the cured resin are 289℃ and 41...
作者:Mitsuhiro Okada , Yuushou Nakayama , Takeshi Shiono
来源:[J].Journal of Organometallic Chemistry(IF 2), 2015, Vol.798, pp.384-387
摘要:... The solubility of the polymer obtained by 1 -B(C 6 F 5 ) 3 was also higher than that obtained by 1 -dMMAO, and dissolved in cyclohexane even at room temperature. The self-standing films of the polynorbornene obtained by the B(C 6 F 5 ) 3 system were prepared by the solution ...
作者:Wenjun Zou , Jin Peng , Yun Yang ...
来源:[J].Materials Letters(IF 2.224), 2006, Vol.61 (3), pp.725-729
摘要:...07 MPa, and its heat decomposition temperature increase from 332 °C to 386 °C, furthermore, the excellent water resistance and transparency have been obtained.
作者:Tai , Chen , Wen ...
来源:[J].Plastics, Rubber and Composites(IF 0.631), 2011, Vol.40 (3), pp.109-115
摘要:... It was also found that the heat decomposition temperature of PMMA grafted CeO2–ZrO2 was higher than that of pure PMMA, which demonstrated that the CeO2–ZrO2 mesoporous materials were potential superior performance filler in...
作者:Biao Yin , Jingyi Wang , Hongbing Jia ...
来源:[J].Journal of Materials Science(IF 2.163), 2016, Vol.51 (12), pp.5724-5737
摘要:... The presence of PGO had also greatly reduced the glass transition temperature ( T g) and enhanced the storage modulus of SBR matrix in the nano-composites. Meanwhile, the maximum heat decomposition temperature ( T max) was increased by 23.6 °C; equ...
作者:Xiaodong Xue , Yang Chen , Qing Yin ...
来源:[J].Polymer International(IF 2.125), 2018, Vol.67 (10), pp.1401-1409
摘要:... For example, with only 1 phr (parts per hundred PP) rGO reduced by N2H4, the degree of crystallinity, tensile strength, maximum heat decomposition temperature and thermal conductivity of PP nanocomposite were increased by 6.2%, 20.5%, 48.0 °C and 5...
作者:Xiaodong Xue , Kuan Jiang , Qing Yin ...
来源:[J].Journal of Applied Polymer Science(IF 1.395), 2019, Vol.136 (26), pp.n/a-n/a
摘要:... In comparison with those of neat XNBR, the tensile strength, tear strength, crosslink density, and maximum heat decomposition temperature ( T max) of XNBR/hANFs nanocomposites filled with 7 phr hANFs increased by 236%, 161%, 35%, and 19.64 °C, respectively. © 2...

我们正在为您处理中,这可能需要一些时间,请稍等。

资源合作:cnki.scholar@cnki.net, +86-10-82896619   意见反馈:scholar@cnki.net

×