全部文献期刊会议图书|学者科研项目
中外文文献  中文文献  外文文献
作者:Xin Luo , Yidan Liu , Jianhui Pang ...
来源:[J].Carbohydrate Polymers(IF 3.479), 2020, Vol.236
摘要:Abstract(#br)Stimuli-responsive gel volume variation is reversible and has shown promising applications, which may be potential for contraction or expansion fabrication, generating shrinking or swelling volume of the original. In this study, a thermo/photo dual-crosslinking hyd...
作者:Kai K. Chen , Witopo Salim , Yang Han ...
来源:[J].Journal of Membrane Science(IF 4.093), 2020, Vol.595
摘要:... In order to increase the membrane area in each module conveniently, a multi-leaf rolling procedure utilizing a carrier layer was used, and the fabrication steps were documented in detail. The prototype module comprised up to 7 membrane leaves (each membrane leaf had dimensi...
作者:Peng Zhang , Kexun Wang , Qingfu Li ...
来源:[J].Journal of Cleaner Production(IF 3.398), 2020, Vol.258
摘要:... In this paper, 173 investigations reported in related literatures are integrated, and a comprehensive review on the fabrication and engineering properties of a variety of geopolymer/alkali-activated concretes is presented. The following details are included: probable source m...
作者:Libing Duan , Xinjun Lv , Qian He ...
来源:[J].Biosensors and Bioelectronics(IF 5.437), 2020, Vol.150
摘要:... We believe the simplicity of device, low costs and fast fabrication can be useful in the relevant fields such as biomedical and energy harvesting, especially for low resources areas.
作者:Wondimu A. Gebreyes , Lorenzo Migliorini , Federico Pezzotta ...
来源:[J].Sensors and Actuators: A. Physical(IF 1.841), 2020, Vol.301
摘要:Abstract(#br)We present a fluidic electrochemical sensor fabricated with an additive manufacturing approach based on the combination of fused filament fabrication (FFF), supersonic cluster beam deposition (SCBD) and selective electroplating. The system consists of a miniaturized ...
作者:MONOJIT SEAL , MAINAK SENGUPTA
来源:[J].Sādhanā(IF 0.393), 2017, Vol.42 (8), pp.1419-1429Springer
摘要:This paper deals with the design, analysis and fabrication of a 320 W, 5 m/s, 4-pole permanent-magnet-based linear synchronous machine (LPMSM). The design deals with conventional hand calculations followed by design fine-tuning and analysis using standard FEM packages. Fabrication...
作者:Fan Xu , Dong Lin , Wei Xia ...
来源:[J].Organic Electronics(IF 3.836), 2019, Vol.64, pp.86-91
摘要:Abstract(#br)An environmentally friendly and solvent-free method was reported for fabrication of ferroelectric copolymer P(VDF-TrFE) thin films directly from their molten mass. Friction-transferred poly(tetrafluoroethylene) (PTFE) templates were used for epitaxy during solidifica...
作者:Zihao Xiang , Zhiming Wu , Chunhui Ji ...
来源:[J].Applied Surface Science(IF 2.112), 2020
摘要:Abstract(#br)Vanadium dioxide (VO 2 ), which can initiate an automatic reversible metal-to-insulator transition (MIT) from tetragonal to monoclinic structure at the transition temperature (Tc) of 68 °C, is a promising candidate to realize electronic devices due to its dramat...
作者:Sundar Kunwar , Puran Pandey , Mao Sui ...
来源:[J].Nanoscale Research Letters(IF 2.524), 2017, Vol.12 (1)Springer
摘要:... The Raman analysis showed the discrepancies on phonon modes of Si (111) such that the decreased peak intensity with left shift after the fabrication of Pd nanostructures. Furthermore, the UV-VIS-NIR reflectance spectra revealed the existence of surface morphology dependent...
作者:N. Abdullah , S. K. Kamarudin , L. K. Shyuan ...
来源:[J].Nanoscale Research Letters(IF 2.524), 2017, Vol.12 (1)Springer
摘要:... Thus, this study focuses on the fabrication of a new composite TiO2 carbon nanofiber anodic catalyst support for direct methanol fuel cells (DMFCs) via electrospinning technique. The distance between the tip and the collector (DTC) and the flow rate were examine...

我们正在为您处理中,这可能需要一些时间,请稍等。

资源合作:cnki.scholar@cnki.net, +86-10-82896619   意见反馈:scholar@cnki.net

×