全部文献期刊学位论文会议报纸专利标准年鉴图书|学者科研项目
中外文文献  中文文献  外文文献
作者:Wei Xu , Xuming Zhang , Tie Ke ...
来源:[J].BMC Musculoskeletal Disorders(IF 1.875), 2017, Vol.18 (1)Springer
摘要:This study aimed to evaluate the application of 3D printing in assisting preoperative plan of pedicle screw placement for treating middle-upper thoracic trauma.
作者:Hongxiong Yang , Jacky K. H. Chung , Yuhong Chen ...
来源:[J].EURASIP Journal on Wireless Communications and Networking(IF 0.54), 2018, Vol.2018 (1), pp.1-9Springer
摘要:Abstract(#br)It is controversial that the cost of construction 3D printing is lower than the conventional construction in academic field. The reason is that some scholars have confused attributes between construction 3D printing and traditional construction. The cost calculation ...
作者:Jin-wu Kang , Qiang-xian Ma
来源:[J].China Foundry(IF 0.346), 2017, Vol.14 (3), pp.157-168Springer
摘要:3D printing is such a magical technology that it extends into almost every sector relating to manufacturing, not to mention casting production. In this paper, the past, present and future of 3D printing in the foundry sector are profoundly reviewed. 3D printing has the potential ...
作者:Zhong-de Shan , Zhi Guo , Dong Du ...
来源:[J].China Foundry(IF 0.346), 2017, Vol.14 (6), pp.498-505Springer
摘要:Sand mold 3D printing technology is an advanced manufacturing technology which has great flexible manufacturing ability. A multi-material composite sand mold can control the temperature field of metallic parts during the pouring process, while the current sand mold 3D printing...
作者:Mukund R. Shukla , Amritpal S. Singh , Kevin Piunno ...
来源:[J].Plant Methods(IF 2.667), 2017, Vol.13 (1)Springer
摘要:... Prototyping using 3D printing and LED based light sources could help overcome these limitations and lead to improved culture systems.
作者:Giftymol Varghese , Mónica Moral , Miguel Castro-García ...
来源:[J].Boletín de la Sociedad Española de Cerámica y Vidrio(IF 0.404), 2018, Vol.57 (1), pp.9-18Elsevier
摘要:... A customised 3D printer using a Digital Light Processing (DLP) projector as UV source has been built to fabricate green bodies from photosensitive resins loaded with 25–60 wt% of alumina, 3- and 8-YSZ. The 3D-printed bodies were then sintered in the 1200–1500 °C and e...
作者:Vishal Francis , Prashant K. Jain
来源:[J].Journal of the Brazilian Society of Mechanical Sciences and Engineering(IF 0.234), 2018, Vol.40 (7), pp.1-13Springer
摘要:Abstract(#br)In the present study, a filament modification approach is proposed for in situ nanocomposite development during the 3D printing process. The acrylonitrile butadiene styrene filament was modified by coating it with organically modified montmorillonite (OMMT)-base...
作者:Giftymol Varghese , Mónica Moral , Miguel Castro-García ...
来源:[J].Boletín de la Sociedad Española de Cerámica y Vidrio(IF 0.404), 2018, Vol.57 (1), pp.9-18DOAJ
摘要:... A customised 3D printer using a Digital Light Processing (DLP) projector as UV source has been built to fabricate green bodies from photosensitive resins loaded with 25–60 wt% of alumina, 3- and 8-YSZ. The 3D-printed bodies were then sintered in the 1200–1500 °C and e...
作者:Alessandra Vitale , João T. Cabral
来源:[J].Materials(IF 2.247), 2016, Vol.9 (9)DOAJ
摘要:We investigate the impact of the non-uniform spatio-temporal conversion, intrinsic to photopolymerisation, in the context of light-driven 3D printing of polymers. The polymerisation kinetics of a series of model acrylate and thiol-ene systems, both neat and doped with a light-ab...
作者:Cheng-yang Deng , Jin-wu Kang , Hao-long Shangguan ...
来源:[J].China Foundry(IF 0.346), 2018, Vol.15 (1), pp.37-43Springer
摘要:Abstract(#br)The insulation effect of the air cavity surrounding the riser in a 3D printed sand mold was studied. The influence of the air cavity on heat flux was theoretically analyzed. The results demonstrated that the heat flux of the air cavity in the 3D printed sand mold was...

我们正在为您处理中,这可能需要一些时间,请稍等。

资源合作:cnki.scholar@cnki.net, +86-10-82896619   意见反馈:scholar@cnki.net

×