西里西亚工业大学运输学院
期刊
会议
图书
作者:Ján PIĽA , Peter KORBA , Michal HOVANEC
来源:[J].Scientific Journal of Silesian University of Technology. Series Transport, 2017, Vol.94SUT
摘要:Safety is critical throughout all stages of aircraft operation, from air mission to ground operation. One of the most important airframe systems that influences the efficacy of ground safety is a wheel brake system. Aircraft ground speed deceleration requires the dissipation of k...
作者:Paweł GŁOWACKI , Włodzimierz BALICKI
来源:[J].Scientific Journal of Silesian University of Technology. Series Transport, 2017, Vol.94SUT
摘要:Poland, as a member of the EU, is represented within the ICAO, by the European Aviation Safety Agency. However, this does not relieve our country from the responsibility of developing a state safety programme (SSP). The need to set up such a programme, which has to be specif...
作者:Renata ŻOCHOWSKA , Grzegorz KAROŃ , Aleksander SOBOTA ...
来源:[J].Scientific Journal of Silesian University of Technology. Series Transport, 2017, Vol.95SUT
摘要:The article presents the essential issues and algorithm of the methodology of a four-step transportation model, which was constructed in order to carrying out a household interview survey. The results of this research are source data for determining the travel behaviour of the us...
作者:Tomasz BALCERZAK
来源:[J].Scientific Journal of Silesian University of Technology. Series Transport, 2017, Vol.95SUT
摘要:The sole purpose of air accident investigations should be the prevention of accidents and incidents in the future without apportioning blame or liability. Any civil aviation safety system is based on feedback and lessons learned from accidents and incidents, which require th...
作者:Jarmila VOJTKOVÁ
来源:[J].Scientific Journal of Silesian University of Technology. Series Transport, 2017, Vol.96SUT
摘要:In the toroidal drive, a screw-shaped groove is cut into the globoid worm. There is contact with the rolling element in this groove. This helix can be described by parametric equations. When calculating the values of the first and second curvature of the curve, as well as the rad...
作者:Tomasz MARKIEWICZ , Łukasz KACZMARCZYK , Paweł FABIŚ
来源:[J].Scientific Journal of Silesian University of Technology. Series Transport, 2017, Vol.94SUT
摘要:This paper is a summary of the design and workmanship of the formula student engine intake vehicle, for simulation research projects were conducted on the intake system. In the process, the most favourable model system was selected, which was capable of producing a satisfactory r...
作者:Robert KONIECZKA
来源:[J].Scientific Journal of Silesian University of Technology. Series Transport, 2017, Vol.94SUT
摘要:This article attempts to provide a synthesis of basic directions indispensable to accurately collecting evidence after an aviation accident. The proper collection procedure ensures the avoidance of the loss of evidence critical for an investigation carried out by law enforce...
作者:Delia Berenice VILLARREAL CHÁVEZ , Agata KUREK , Grzegorz SIERPIŃSKI ...
来源:[J].Scientific Journal of Silesian University of Technology. Series Transport, 2017, Vol.96SUT
摘要:The article addresses solutions implemented in two cities, namely, Mexico City and Katowice, with the aim of improving road traffic safety. Despite the distance of more than 10,000 km separating the two cities, a comparison revealed many similar solutions having been implemented ...
作者:Zbigniew OLCZYKOWSKI , Jerzy WOJCIECHOWSKI , Jakub MŁYŃCZAK
来源:[J].Scientific Journal of Silesian University of Technology. Series Transport, 2017, Vol.96SUT
摘要:The subject of this paper deals with the reliability of the power supply and quality of electricity on the railway networks. The paper discusses the impact of changes in the area of traction substation load on parameters characterizing the quality of electricity. It analyses the ...
作者:Michał JUZEK , Grzegorz WOJNAR
来源:[J].Scientific Journal of Silesian University of Technology. Series Transport, 2017, Vol.96SUT
摘要:This article is dedicated to the subject of gearboxes, with a specific focus on the load distribution on the tooth. The aim of the study was to review the selected solutions and methods that can contribute to aligning the load on the width of the tooth. The structure and operatio...

我们正在为您处理中,这可能需要一些时间,请稍等。

资源合作:cnki.scholar@cnki.net, +86-10-82896619   意见反馈:scholar@cnki.net

×