JVE 国际有限公司
期刊
会议
图书
作者:... Mikhail Kuashnin , Algazy Zhauyt , Toty Buzauova
来源:[J].Journal of Vibroengineering(IF 0.452), 2017, Vol.19 (2), pp.1197-1213JVE
摘要:Shock absorbers are intended for developing forces providing the elimination or reduction of the amplitude of cars or their parts fluctuations. On the CIS railroads, the wedge-type shock absorber became the most wide-spread in trucks of freight cars. In friction shock absorb...
作者:Algazy Zhauyt , Aksholpan Kopesbayeva ...
来源:[J].Journal of Vibroengineering(IF 0.452), 2016, Vol.18 (7), pp.4155-4163JVE
摘要:The paper presents the design of a planetary drive with 2 degrees of freedom and simulation of the proposed mechanism in ADAMS software. The mechanism can be used to smoothly change the reduction ratio depending to the applied load on the output shaft. At constant input of motor ...
作者:Algazy Zhauyt , Aizhan Sakenova ...
来源:[J].Vibroengineering PROCEDIA, 2017, Vol.12, pp.124-129JVE
摘要:One of the most important characteristics of construction behavior is physical nonlinearity which appears in the course of deformation between strain and deformations. Its account complicates algorithm; therefore, many modern construction calculations are spent in an elastic stag...
作者:Algazy Zhauyt , Indira Zhahanova ...
来源:[J].Vibroengineering PROCEDIA, 2017, Vol.12, pp.208-212JVE
摘要:It is necessary to make link mechanisms calculation to the strength at designing of flat link mechanisms of high class after definition of block diagrams and link linear sizes i.e. it is rationally to choose their forms and to determine the section sizes. The algorithm of the def...
作者:Murat Adambayev , Algazy Zhauyt , Saltanat Yussupova
来源:[J].Journal of Measurements in Engineering, 2019, Vol.7 (3), pp.155-163JVE
摘要:The results of laboratory studies of innovative technology for grinding raw materials are presented. Grinding technology is one of the most energy-intensive industries in the industry. The obtained data confirm the possibility of obtaining breakthrough technical and economic indi...
作者:Algazy Zhauyt , Saltanat Yussupova
来源:[J].Journal of Measurements in Engineering, 2017, Vol.5 (3), pp.142-151JVE
摘要:Actually, the side bearings of constant contact cabs are installed on freight cars of new design railroad gage of 1520 mm. Parameters of side bearing elastic elements have significant effect on dynamic behavior of the car and traffic safety. The article is devoted to comparison o...
作者:... Kuatbek Kozhamberdiyev , Bagdat Uskembayeva , Algazy Zhauyt
来源:[J].Vibroengineering PROCEDIA, 2017, Vol.13, pp.249-254JVE
摘要:This paper analyzes the dynamical behavior of a six-bar linkage used in mechanical presses for metal forming such as deep drawing. Raising the technical level of machines requires an expansion of technological capabilities of the equipment and devices of the existing structures, ...
作者:... Gulnara Abdraimova , Algazy Zhauyt , Muslimzhan Ibadullayev
来源:[J].Journal of Measurements in Engineering, 2018, Vol.6 (1), pp.1-9JVE
摘要:In this paper we consider in general form the compilation of a dynamic model of a cantilever rod with a variable cross section that performs bending vibrations. A real mechanical system is a system with distributed parameters. The task of dynamic modeling is the creation of a mor...
作者:Algazy Zhauyt , Gulsara Yestemessova ...
来源:[J].Vibroengineering PROCEDIA, 2018, Vol.18, pp.183-188JVE
摘要:Numerous studies have established that the damage to the lower surface of hot-rolled strips is mainly due to their friction against rollers of mill rollers. In this case, the probability of scoring, scrapes and other mechanical damage increases otherwise severe wear on the surfac...
作者:Algazy Zhauyt , Toty Buzauova ...
来源:[J].Journal of Measurements in Engineering, 2017, Vol.5 (3), pp.125-133JVE
摘要:Some results of measurements of bending deformation concrete span bridge are given. It is shown that for a more detailed estimation of the dynamic answer of the structure and the establishment of the correspondence between the analytical model and behavior of structure, it is nec...

我们正在为您处理中,这可能需要一些时间,请稍等。

资源合作:cnki.scholar@cnki.net, +86-10-82896619   意见反馈:scholar@cnki.net

×