国际维也纳多瑙河亚德里亚自动化与制造协会
期刊
会议
图书
作者:Sotelo, D. , Favela-Contreras, A. , Lozoya, C. ...
来源:[J].International Journal of Simulation Modeling(IF 1.656), 2019, Vol.18 (2), pp.229-241国际维也纳多瑙河亚德里亚自动化与制造协会
摘要:Petroleum subproducts are obtained in a crude oil distillation plant. Here, due to the chemical properties of the crude oil, a series of complex reactions occurs, and measurements are not always feasible. This poses a challenge to analyse the outcome of the process under rea...
作者:Bhanot, V. , Dhumane, R. , Petagna, P. ...
来源:[J].International Journal of Simulation Modeling(IF 1.656), 2019, Vol.18 (2), pp.302-313国际维也纳多瑙河亚德里亚自动化与制造协会
摘要:In this article, the development of a simulation tool for two-phase cooling systems is discussed. The targeted application is modelling of the two-phase pumped loop systems used for Silicon tracking detector cooling at CERN. These systems are similar to vapour compression systems...
作者:Edler, J. , Tic, V. , Lovrec, D.
来源:[J].International Journal of Simulation Modeling(IF 1.656), 2019, Vol.18 (2), pp.267-278国际维也纳多瑙河亚德里亚自动化与制造协会
摘要:Hydrostatic bearings in machine tools are used for qualitative highest demands. On the one hand, they are used in precision machines, for example, in grinding machines, to get high precision and the highest quality in the production. On the other hand, they are used in machines w...
作者:Bardzinski, P. J. , Krol, R. , Jurdziak, L.
来源:[J].International Journal of Simulation Modeling(IF 1.656), 2019, Vol.18 (2), pp.279-289国际维也纳多瑙河亚德里亚自动化与制造协会
摘要:A model of the transport system in a copper ore mine was prepared using FlexSim software and the simulations were performed for five days. Empirical parameters were applied to each item of the transport system in order for the ore transport times to correspond to the actual condi...
作者:Song, R. J. , Hou, C. W. , Shi, Z. C. ...
来源:[J].International Journal of Simulation Modeling(IF 1.656), 2019, Vol.18 (2), pp.314-324国际维也纳多瑙河亚德里亚自动化与制造协会
摘要:Piezoelectric energy harvesters (PEHs) have been investigated for decade years for powering low energy consumed electric devices. However, research of PEH more focuses on the structure and energy capture performance, ignoring the interaction between the PEHs and environmental vib...
作者:Sousa Junior, W. T. de , Montevechi, J. A. B. , Miranda, R. de C. ...
来源:[J].International Journal of Simulation Modeling(IF 1.656), 2019, Vol.18 (2), pp.205-216国际维也纳多瑙河亚德里亚自动化与制造协会
摘要:The use of discrete event simulation optimisation methods is a tool commonly used as a decision-making support system in industrial problems, concerning management and resource allocation in order to maximise a set of values regarding costs, revenues and other enterprise interest...
作者:Wang, Y. , Yang, O. , Wang, S. N.
来源:[J].International Journal of Simulation Modeling(IF 1.656), 2019, Vol.18 (2), pp.335-343国际维也纳多瑙河亚德里亚自动化与制造协会
摘要:Concerning the inverse job-shop scheduling problem (JSP), this paper proposes a hybrid solution based on genetic algorithm (GA) and improved particle swarm optimization (PSO), with the aim to minimize the parameter adjustment. The solution was presented as a block coding plan wit...
作者:Yang, S. L. , Xu, Z. G. , Wang, J. Y.
来源:[J].International Journal of Simulation Modeling(IF 1.656), 2019, Vol.18 (2), pp.366-377国际维也纳多瑙河亚德里亚自动化与制造协会
摘要:Flexible production is able to respond to a changing production system. To efficiently optimize a changed production layout and configuration, a modelling and optimization method based on discrete event simulation (DES) was proposed. A mathematical optimization model of the works...
作者:Gomboc, T. , Zadravec, M. , Ilijaz, J. ...
来源:[J].International Journal of Simulation Modeling(IF 1.656), 2019, Vol.18 (2), pp.217-228国际维也纳多瑙河亚德里亚自动化与制造协会
摘要:In the present work, a detailed description of a three-stage spray drying model capable of accurate simulation of drying of zeolite suspensions coupled with a CFD flow solver is presented. The models resolve the temperature field in the interior of the droplet, which consists of ...
作者:Zhang, H. P.
来源:[J].International Journal of Simulation Modeling(IF 1.656), 2019, Vol.18 (2), pp.344-354国际维也纳多瑙河亚德里亚自动化与制造协会
摘要:This paper attempts to optimize the remanufacturing production scheduling under randomness and fuzziness. Firstly, the rough set theory and multi-objective approximation ranking algorithm were combined into a quality evaluation method of remanufacturing recycling resources, which...

我们正在为您处理中,这可能需要一些时间,请稍等。

资源合作:cnki.scholar@cnki.net, +86-10-82896619   意见反馈:scholar@cnki.net

×