Hrcak期刊
期刊
会议
图书
作者:Samuratov, Ye. , Kelamanov, B. , Akuov, A. ...
来源:[J].Metalurgija(IF 0.69), 2020Hrcak
摘要:Studies have been carried out to investigation the possibility of the agglomeration of thermomagnetic manganese concentrates from the Zhomart and Western Kamys fields (Kazakhstan) with obtaining from them conglomerates suitable for chemical and mechanical properties for subsequen...
作者:Jiao, A. Y. , Chen, F. L. , Liu, B. H. ...
来源:[J].Metalurgija(IF 0.69), 2020Hrcak
摘要:In this paper, the macroscopic observation and chemical composition analysis of the third crankshaft journal have been carried out. Moreover, macroscopic observation, chemical composition analysis and metallographic analysis were carried out, and were compared with the journal wi...
作者:Kawałek, A. , Bajor, T. , Sawicki, S. ...
来源:[J].Metalurgija(IF 0.69), 2020Hrcak
摘要:The article presents the results of rheological testing of Al 5754 alloy in series 5xxx, obtained for deformation parameters corresponding to the process of extrusion of large-size sections on presses. The effect of deformation conditions on the variations in yield stress magnitu...
作者:Wang, R. , Wang, Y. , Wang, H. ...
来源:[J].Metalurgija(IF 0.69), 2020Hrcak
摘要:Using conical end blanks is an effective method to improve the concave defects of cross wedge rolling, while the common method to get conical end blanks is machining, still causing material loss. Aimed at this situation, this paper proposes a roll-cutting forming method of conica...
作者:Liu, J. H. , Wang, Q. , Guan, Z. G. ...
来源:[J].Metalurgija(IF 0.69), 2020Hrcak
摘要:The Blast Furnace hot metal constitute and performance were effect by fluidity and fusion of the slag, as a result, BF smelting course was influenced. In the paper, the titanium slag was researched on, one iron and steel enterprise BF slags were detected and analysis by Scan...
作者:Guan, S. Y. , Zhang, W. Y. , Xia, X. ...
来源:[J].Metalurgija(IF 0.69), 2020Hrcak
摘要:In the twin-roll casting process, how to accurately control the molten metal pool level is a key problem to produce high quality strip. In this paper, the mathematical model about the pool level control is set up based on the process characteristics. Meanwhile, the limitations of...
作者:Kozhevnikov, A. , Kozhevnikova, I. , Bolobanova, N. ...
来源:[J].Metalurgija(IF 0.69), 2020Hrcak
摘要:The article states new results of the theoretical and applied research on prevention of chatter in stands of continuous cold rolling mills. It was found that chatter occurs under those process conditions, which involve violation of a condition of strip rolling with tension becaus...
作者:Liu, J. H. , Wang, Q. , He, Z. J. ...
来源:[J].Metalurgija(IF 0.69), 2020Hrcak
摘要:Al2O3 is one of the main component in blast furnace (BF) slag, which the reaction mechanism influence on the metallurgical performance directly in the process of the slag forming. In the paper, ΔGfθ was used to analyzed the slag formation reaction process of the Al2O3, at th...
作者:Shlomchak, G. , Mamuzić, I. , Shvachych, G. ...
来源:[J].Metalurgija(IF 0.69), 2020Hrcak
摘要:The article is devoted the problem to researh the materials thermophysical properties by the inverse methods. Corresponding class of mathematical models is derived. The main research purpose is that the simulation models processing procedure as those that are controlled by input ...

我们正在为您处理中,这可能需要一些时间,请稍等。

资源合作:cnki.scholar@cnki.net, +86-10-82896619   意见反馈:scholar@cnki.net

×